415
461
30
429
432
17
405
10
41
480
88
This document is printed on
chlorine-free (ECF) paper with soy ink.
For details please contact:
Printed in Japan
LPA564
Dimensions
unit : mm
GENERAL SPECIFICATIONS
TX6n
TX5n
TX4n
Output Power (W)
120V(US) 230V(EU)
*
1
120V(US) 230V(EU)
*
1
120V(US) 230V(EU)
*
1
2Ω per channel
2750 2750 2500 2500 2200 2200
4Ω per channel
3000 3000 2200 2300 1900 2000
8Ω per channel
1800 1800 1300 1300 1100 1100
1kHz
4Ω
bridge
5500 5500 5000 5000 4400 4400
THD+N=1%
8Ω
bridge
6000 6000 4400 4600 3800 4000
1kHz
2Ω per channel
4100 4120 3480 3600 2990 3050
20mS burst
4Ω
bridge
8200 8240 6960 7200 5980 6100
Constant
STEREO mode:
-
100V line,
-
voltage line
Ω
1250W / 8Ω
Ω
BRIDGE mode:
-
200V line,
-
Ω
2500W / 16Ω
Ω
SN ratio
20Hz-20kHz (DIN
AUDIO)
108dB 107dB 106dB
Power
Stand-by
20W
consumption (W)
Idle
100W
1/8
*
2
(2ΩΩ/ Pink noise)
1800W 1600W 1500W
All Models
THD+N
20Hz-20kHz,
Half Power RL=4
Ω
, 8
Ω
0.2%
Intermodulation Distortion
60Hz: 7kHz, 4:1, Half Power
*
2
0.25%
Frequency response
MAX
+0.5dB
RL=8
Ω
, Po=1W
TYP
0dB
10Hz-20kHz
MIN
-0.5dB
Channel
Half Power RL=8
Ω
,1kHz
65dB
Separation
Att. max input 600
Ω
shunt
Damping Factor
RL=8
Ω
1kHz
800
Voltage Gain
43.8dB ~ 19.8dB, 0.1dB step
Maximum Input Voltage
+24dBu*
4
Input Impedance
20kΩ (balanced) 10kΩ (unbalanced)
Controls
Front Panel
POWER switch (push on / push off),
Rotary encoder x 2, Function button x 4,
HOME button x 1, EXIT button x 1,
ENTER button x 1, Mute button x 2
Connectors
Analog input
In
XLR-3-31 type x 2
Thru
XLR-3-32 type x 2
AES/EBU
input/output
In
XLR-3-31 type x 1 (2 channels, 24-bit 96kHz ~ 44.1kHz)
Thru
XLR-3-32 type x 1 (2 channels)
Out
XLR-3-32 type x 1 (2 channels, 24-bit 96kHz ~ 44.1kHz)
Speaker
output
Neutrik
®
SPEAKON
®
NL4 x 2,
5-way binding post x 2 pairs
Ethernet
RJ45 x 1
Fault
output
Euroblock connector (3P) x 1
Indicators
IDENTIFY, NETWORK, PROTECTION, BRIDGE,
PARALLEL, POWER, STANDBY, MUTE, ALERT,
CLIP,
SIGNAL,
Load protection
POWER switch on / off mute,
DC-fault: Amplifier shuts down automatically.
clip limiting: THD ≥ 0.5%
Amplifier protection
Thermal: Mute the output (heatsink temp ≥ 90°C)
(return automatically.).
VI limiter (RL ≤ 1ΩΩ) : Limit the output
Power supply protection
Thermal: Amplifier shuts down automatically. (heatsink
temp ≥ 100°C)
Cooling
Variable speed fan: x 2
Power requirements
US : 120V (60Hz) 30A Twist lock connector
EU : 220V ~ 230V (50Hz / 60Hz)
Dimensions(W×H×D)
480 x 88 x 461mm (18.9” x 3.46” x 18.1” : 2U)
Weight
16.0kg (35 lbs)
Accessory
Handle x 2 (with flat-head screw x 4),
Euroblock connector (3P) x 1, Owner's Manual
Specifications and appearance are subject to change without notice.
(*1) Output power depends on the power supply voltage. These figures are based on 230V.
If the power supply voltage is 220V, output power can be 8% less than the power shown in the spreadsheet.
Output power can be 7% more in case of 240V.
(*2) 1/8 power = 9dB below rated power
(*3) Half power = 3dB below rated power
(*4) 0dBu = 0.775Vrms
1/8 = Power consumption at 1/8 maximum output power
Neutrik
®
and Speakon
®
are trademarks of Neutrik
®
.
All trademarks used are properties of their respective owners.
P O W E R A M P L I F I E R S
High Power Touring Amplifiers
with Internal DSP
and Advanced Networking Capabilities
