SINGLE: Edit
SINGLE EDIT
This is where you create your own voices, or edit the preset voices. In this section we assume you already
know something about FM synthesis. If you are new to FM, please turn to p.83 and read “What’s FM?”
before continuing.
In SINGLE mode, press EDIT/COMPARE. The EDIT LED will light, and the
EDITING
LCD will show the previously edited parameter. Use the PARAMETER keys to
PROCEDURE
move through the parameters, Use the DATA ENTRY keys to change the data
value. When the LCD shows several parameters at once, use the CURSOR keys
to move the blinking cursor to the parameter you want to set. (The CURSOR
LED will automatically come on when you enter EDIT mode.) Some parame-
ters are in groups, and when the LCD shows “xxxxxx ?” you can press YES
to edit the parameters inside the group.
–12–
