SINGLE: Play
PLAY SINGLE
Use the PARAMETER keys to select voice banks I, A, B, C, D, and use the DATA ENTRY keys to select
voices 1-32.
Bank I, A-D Voice number and name
The 128 factory preset voices are listed on p.4. If the Program Change Conversion table (p.26) is initialized,
incoming MIDI Program Changes 1-32 will select bank I 1-32 (internal user memories), 33-64 will select from
bank A, and so on.
When the TX81Z is shipped, the internal user memories I01-132 contain selected voices from banks A-D.
STORE VOICE
You can store the currently selected voice (edited or not) in the Internal user memory (Bank I). While in
PLAY SINGLE mode, press and hold the STORE key. The LCD will ask
so continue holding STORE and use the DATA ENTRY keys to select the store destination (I01-I32).
Select destination
When the LCD shows the destination you want, release STORE and press YES. The voice will be stored into
the selected memory. (You can quit without storing by pressing NO.)
–11–
