Perio
d
ic maintenance an
d
a
d
justment
7-30
7
EAU25081
Rear wheel
EAU56610
To remove the rear wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Loosen the axle nut.
2. Remove the brake pedal free play
adjusting nut, and then discon-
nect the brake rod from the brake
camshaft lever.
3. Turn the drive chain adjusting
plate on each side of the swing-
arm fully in direction (a).
4. Lift the rear wheel off the ground
according to the procedure on
page 7-28.
5. Remove the axle nut, and then pull
the wheel axle out.
6. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
TIP
The drive chain does not need to be
disassembled in order to remove and
install the wheel.
7. Remove the wheel.
To install the rear wheel
1. Insert the wheel axle from the left-
hand side.
TIP
Make sure that the drive chain adjust-
ing plates are installed with the
punched sides facing to the outside
and that the slot in the brake shoe plate
fits over the retainer on the swingarm.
1. Axle nut
1. Brake pedal free play adjusting nut
2. Brake rod
1. Rear wheel
2. Drive chain
1
2
(a)
U2PT17E0.book Page 30 Monday, March 30, 2020 2:13 PM
Содержание TTR 125 2020
Страница 1: ...PRINTED IN BRAZIL 2020 04 JC E TT R125LWE 2PT F8199 17 LIT 11626 34 46...
Страница 10: ...Location of important labels 1 2 1 U2PT17E0 book Page 2 Monday March 30 2020 2 13 PM...
Страница 84: ...U2PT17E0 book Page 2 Monday March 30 2020 2 13 PM...
Страница 86: ...PRINTED IN BRAZIL 2020 04 JC E TT R125LWE 2PT F8199 17 LIT 11626 34 46...