Yamaha TT-R125E, Руководство пользователя

Страница: 35 / 92

INSTRUMENT AND CONTROL FUNCTIONS
4-7
4
EAU13660
Kickstarter
If the engine fails to start by pushing the
start switch, try to start it by using the
kickstarter. To start the engine, fold out
the kickstarter lever, move it down light-
ly with your foot until the gears engage,
and then push it down smoothly but
forcefully. This model is equipped with
a primary kickstarter, allowing the en-
gine to be started in any gear if the
clutch is disengaged. However, shifting
the transmission into the neutral posi-
tion before starting is recommended.
EAUW0482
Seat
To remove the seat
1. Remove panel A. (See page 7-6.)
2. Remove the bolt.
3. Remove the bolt that fastens the
seat and panel C.
4. Remove the seat by pulling it off.
To install the seat
1. Insert the seat projections into the
seat holders as shown.
2. Place the seat in the original posi-
tion, and then tighten the bolts.
3. Install the panel.
TIP
Make sure that the seat is properly se-
cured before riding.
1. Kickstarter
1. Bolt
2. Panel C
U39C81E0.book Page 7 Monday, April 26, 2010 2:43 PM