LISTENING TO iPod™ AND EXTERNAL SOURCES
7
En
E
ngl
is
h
Connection between transmitter and unit is made by setting their group settings the same.
■
Group setting for the unit
■
Group setting for the transmitter
■
Playing back
Group setting
1 Set
SOURCE
to iPod.
2 Press and hold
MEMORY
.
3 Set the group with
TUNING
.
Select A1, A2, A3, B1, B2 or B3.
B1/B2/B3 are displayed as b1/b2/b3 on
the front panel display.
4 Press
MEMORY
.
Set the group selection switch.
Playing back external sources
1 Connect your portable audio
device to AUX using a
commercially available 3.5 mm
mini plug cable.
Turn down the volume of this unit and your
portable audio device before connection.
2 Set
SOURCE
to AUX.
3 Start playback on the
connected portable audio
device.
Press and hold.
Rear panel
Note
