17
En
Eng
lish
The unit includes an alarm function (IntelliAlarm) that plays back audio sources or a set of beep (internal alarm sound) at the
set time using a variety of different methods. The alarm function has the following features.
3 types of alarms
Select from 3 alarm types, combining music and beep sounds.
Various audio sources
The iPod, audio CD, data CD, USB device and radio can be selected. The following playback methods can also be selected
depending on the audio source:
* For information on creating a playlist, refer to the instructions for your iPod or iTunes.
Snooze
The snooze function can be enabled to replay the alarm after 5 minutes (
USING THE ALARM FUNCTION
BEEP
The selected audio source and beep sound are played at the set time. This mode is recommended for the best
possible start to the day.
3 minutes before the set time:
the source music begins to fade in and the volume gradually increases as the
alarm time approaches.
Alarm time:
a beeping sound also begins playing.
SOURCE
The selected audio source is played at the set time. The volume fades in gradually and increases to the set
volume.
BEEP
The beep sound is played at the set time.
Source
Playback method
Function
iPod
Resume
The unit resumes play from the last track you played.
If you’ve created a playlist* with the name “ALARM Yamaha DTA” in advance, the
playlist stored on the iPod can be played back repeatedly.
When entering the playlist name, use single-byte spaces to separate words, and enter
single-byte characters, taking care that uppercase/lowercase letters are used correctly.
Audio CD
Selected track
The selected track is played repeatedly.
Resume
The track you listened to last time is played back.
Data CD/USB device
Folder
The selected folder is played repeatedly.
Resume
The track you listened to last time is played back.
DAB/FM
Preset station
The selected preset station is played.
Resume
The DAB/FM station you listened to last time is played back.
