Operation an
d
important ri
d
in
g
points
5-1
5
EAU15952
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10272
Failure to familiarize yourself with
the controls can lea
d
to loss of con-
trol, which coul
d
cause an acci
d
ent
or injury.
EAU74430
Startin
g
the en
g
ine
NOTICE
ECA10251
See pa
g
e 5-4 for en
g
ine
b
reak-in in-
structions prior to operatin
g
the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 3-19 for more information.
1. Turn the key to “ON”.
The following warning lights and
indicator light should come on for
a few seconds, then go off.
z
Engine trouble warning light
z
Coolant temperature warning
light
z
ECO indicator light
NOTICE
ECA11834
If a warnin
g
or in
d
icator li
g
ht
d
oes
not come on initially when the key is
turne
d
to “ON”, or if a warnin
g
or in-
d
icator li
g
ht remains on, see pa
g
e
3-3 for the correspon
d
in
g
warnin
g
an
d
in
d
icator li
g
ht circuit check.
For ABS models:
The ABS warning light should
come on when the main switch is
turned to “ON” and then go off af-
ter traveling at a speed of 10 km/h
(6 mi/h) or higher.
NOTICE
ECA17682
If the ABS warnin
g
li
g
ht
d
oes not
come on an
d
then
g
o off as ex-
plaine
d
a
b
ove, see pa
g
e 3-3 for the
warnin
g
li
g
ht circuit check.
2. Close the throttle completely.
UBR7E0E0.book Page 1 Tuesday, October 25, 2016 2:44 PM