Yamaha TransAcoustic TA2, Руководство пользователя

Страница: 33 / 76

33
Chapter
En
glish
TA2 Owner’s Manual
4
Using Convenient Functions
(UTILITY)
This section includes UTILITY operations. UTILITY allows you to apply the Reverb effect, use the
metronome, and use other various convenient functions.
Using the metronome
The unit features a built-in metronome that helps you to practice and play with accurate tempo.
NOTE
• When a MIDI Song (page 23) is played back, the metronome plays according to the Song tempo and time signature.
• The metronome tempo and beat restore to the default settings when the power is turned off.
• The metronome volume can be adjusted via Button 3 [Func.] in the UTILITY (page 42).
• When in the Layer mode (page 19), you can play along with the metronome using only the acoustic piano sound by setting
the Voice to “---” (Off).

Turning on/off the metronome
1 Press the Menu button several times
until the [UTILITY] lamp lights up
in orange.
2
Press Button 1 [Metronome] to turn
on the metronome.
The current tempo appears on the display.
While the metronome sounds, a dot at the
lower right of the display flashes at the current
tempo. Even when you change the menu
(VOICE/SONG/UTILITY), the dot keeps
flashing while the metronome is playing.
NOTE
When Button 2 [Reverb] or 3 [Func.] is selected in the UTILITY, you need to press Button 1 [Metronome] to switch the
function before operating step 2 above.
3
To stop the metronome, press Button 1 [Metronome] once again.
Lights up in orange