Yamaha TNR-W Скачать руководство пользователя страница 114

Страница: 114 / 123

Appendix

TENORI-ON Manual

114

Troubleshooting

Symptom

Possible Cause & Solution

Page

SD Memory Card

Can’t record or play.

The SD Memory Card is write-protected. Set the card’s write-protect

switch to the OFF position.

page 63

Too much performance data. Performances that exceed 39KB (About

1000 operations) cannot be recorded.

–

Not enough remaining SD Memory Card capacity. Use a different SD

Memory Card.

–

Cannot perform file operations.

Save and rename operations can only be performed on up to 100 files

that have file names in which the first five characters are the same.

–

The SD Memory Card is write-protected. Set the card’s write-protect

switch to the OFF position.

page 63

Not enough remaining SD Memory Card capacity. Use a different SD

Memory Card.

–

The maximum number of files has been exceeded. Up to 1,000 files

can be stored in the TENORI-ON folder, or up to 256 files of each file-

extension type.

page 62

A loaded All Blocks, Current Block, or

Current Layer file does not play

automatically.

If playback is paused when a file is loaded, the loaded file will not be

played automatically. Return to the status display and press the [OK]

button to begin playback.

–

Others

The loop indicator doesn’t move.

The pause mode may have been engaged by pressing the [OK]

button. Press the [OK] button a second time.

–

The loop point and/or loop speed settings

have changed.

These settings change when the Play menu Master Loop Point and

Master Loop Speed settings are changed.

–

Содержание TNR-W




























































































































Результаты поиска

Содержание TNR-W

Отзывы:

Yamaha TNR-W, Руководство пользователя, Страница: 114 / 123

Результаты поиска

Содержание TNR-W

Отзывы: