Yamaha Tmax XP500Z, Руководство пользователя

Страница: 42 / 102

6-1
1
2
3
4
5
6
7
8
9
OPERATION AND IMPORTANT RIDING POINTS
EAU15951
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWA10271
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
EAU48020
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. In this case, the multi-func-
tion display indicates error code 30, but
this is not a malfunction. Turn the key to
“OFF” and then to “ON” to clear the er-
ror code. Failing to do so will prevent
the engine from starting even though
the engine will crank when pushing the
start switch.
EAU45952
Starting the engine
NOTICE
ECA10250
See page 6-3 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
In order for the ignition circuit cut-off
system to enable starting, the side-
stand must be up.
See page 4-19 for more information.
1. Turn the key to “ON” and make
sure that the engine stop switch is
set to “
”.
The following warning light, indica-
tor light and indicators should
come on for a few seconds, then
go off.
●
Engine trouble warning light
●
V-belt replacement indicator
●
Oil change indicator
NOTICE
ECA15022
If a warning light, indicator light or
indicator does not go off, see pages
4-1, 4-6, 4-7 or 4-4 for the corre-
sponding warning light, indicator
light or indicator circuit check.