THR30II Wireless THR10II Wireless THR10II
Reference Manual
3
Control Panel
q
[
] (Power Button) / Power Button LED
This is the unit’s power button.
When the power is ON, the Power Button LED, the lamp corresponding to the selected amp type and the
Power Lamp in the speaker cabinet light.
w
LED Display
Indicates each of the THR-II’s settings and conditions.
e
[TAP/TUNER] button
Tuner Function
Holding the switch for 1 second engages the tuner function and lights the
indicators.
The tuner is calibrated to A4=440Hz. Tune the guitar until the desired pitch appears in the LED display.
When only the circle (
) in the center of the
display is visible, tuning is accurate.
Press the [TAP/TUNER] button (less than one second) to turn OFF the tuner function.
* When the tuner function is set to ON, the guitar sound to the main speaker, [PHONES] jack, and [USB] jack is muted. The
sounds from the [AUX] jack, [USB] jack and Bluetooth are output to the main speaker and [PHONES] jack.
Names and Functions
q
w
!5
!6
!7
e
y u i
o !0 !1
!2
!3 !4
r
!8
q
w
!5
!6
!7
e
t y u
i
o
!0
!1
!2
!3 !4
r
!8
!9
THR30II Wireless
THR10II Wireless
THR10II
*
THR10II Wireless only
Pitch is low
Pitch is high
In tune
