background image

Toolbar

Reference Manual

TF Series

- 25 -

6

PIN for MonitorMix (V1.1 and later)

This is a 4-digit password that is required when accessing the console using the 
MonitorMix app.
MonitorMix is an iOS-compatible app that allows performers to adjust the levels of the 
monitor mix directly from the stage.

TIME screen

Allows you to set the console's internal clock and change the date and time format. The date 
and time set here are used as a timestamp when saving Scenes.

1

Date setting

Determines the console's date setting.

2

Date format setting

Allows you to select the date format.
The following formats are available.
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD

3

Region

Allows you to change the region.

4

DST (+1:00)

Enables daylight saving time.
When turned on, the current time advances by one hour.

5

Time format setting

Allows you to select the time format.
24-Hour
12-Hour (uses AM and PM)

6

Time setting

Determines the console's time setting.

NOTE

When the DHCP button is selected, items 

2

4

 are not needed.

2

4

 are only needed when you select the Static IP button. Configure these parameters as needed.

ձ

ղ

ճ

մ

յ

ն

Содержание TF1




























































































Отзывы: