Yamaha Tenere 700 2020, Руководство по обслуживанию

Страница: 321 / 472

ELECTRIC STARTING SYSTEM
8-10
EAS30495
TROUBLESHOOTING
The starter motor fails to turn.
TIP
• Before troubleshooting, remove the following part(s):
1. Rider seat
2. Tail cover
3. Drive chain cover
NG
→
OK
↓
NG
→
OK
↓
OK
→
NG
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
1. Check the fuses.
(Ignition and main)
Refer to “CHECKING THE FUS-
ES” on page 8-130.
Replace the fuse(s).
2. Check the battery.
Refer to “CHECKING AND
CHARGING THE BATTERY” on
page 8-130. • Clean the battery terminals.
• Recharge or replace the battery.
3. Check the starter motor operation.
Refer to “CHECKING THE START-
ER MOTOR OPERATION” on page
8-136.
Starter motor is OK. Perform the electric
starting system troubleshooting, starting
with step 5.
4. Check the starter motor.
Refer to “CHECKING THE START-
ER MOTOR” on page 5-40. Repair or replace the starter motor.
5. Check the relay unit (starting circuit
cut-off relay).
Refer to “CHECKING THE RE-
LAYS” on page 8-131.
Replace the relay unit.
6. Check the relay unit (diode).
Refer to “CHECKING THE RELAY
UNIT (DIODE)” on page 8-133. Replace the relay unit.
7. Check the starter relay.
Refer to “CHECKING THE RE-
LAYS” on page 8-131. Replace the starter relay.
8. Check the main switch.
Refer to “CHECKING THE
SWITCHES” on page 8-129. Replace the main switch/immobilizer unit.