Yamaha SY99, Руководство пользователя, Страница: 292 / 344

UTILITY MODE
MIDI DATA RECORDER
2. Input
Summary: This operation receives MIDI bulk data
from an external device into SY99 MDR
memory.
Procedure:
From: MIDI data recorder utility job
directory (JUMP #830)
Select: 02:Input
Specify: the MDR data memory into which the
MIDI bulk data will be received
To begin: reception press F8 (Go)
To quit: without receiving press EXIT
To end: reception press EXIT
Data Name (1-99): The MDR memory can
accommodate up to 99 sets of bulk data, and
each set can contain one or more F0-F7 blocks
or messages. The number and name of each bulk
data set are displayed here. To assign a name to
a set of bulk data, press F6 (Name) as explained
below.
Blk Cnt (1-32767): For data which already
exists in MDR memory, this displays the
number of F0-F7 blocks in each set of data.
Size: For data which already exists in MDR
memory, this displays the total size of the set of
data in kilobytes.
to scroll the display up
or down.
orF2 Press Fl
By pressing F5 (Del) you can delete the selected
set of data from MDR memory.
By pressing F7 (Name) you can name an unused
memory or rename a previously used memory.
When you press F8 (Go), the SY99 will begin
recording the incoming MIDI bulk data until you
press EXIT.
1. Move the cursor in
location (marked "- NEW -*") into which the
incoming MIDI bulk data will be received. If nec-
orF2
play up or down.
essary, press F1
It is not possible to receive MDR data into a
location which already contains data. If you wish
to delete or overwrite old MDR data, press F4
(Del) to delete the data.
2. If desired, you can assign a name to the data by
pressing F6 (Name). A display will appear,
allowing you to input an MDR name. You may
execute MDR input from the naming screen.
3. Whether or not you have assigned a name to the
data, press F8 (Go) to begin recording MDR
data. The bottom line of the display will show
"MDR Recording!".
4. Refer to the operating manual for your MIDI de-
vice, and make it transmit the desired type of
MIDI bulk data. As the SY99 receives data, the
number of blocks that have been received will be
displayed in the bottom line. You may transmit
any number of MIDI bulk messages (F0-F7
blocks) from any number of devices, and they
will all be received into the currently selected
set of bulk data.
5. When the external device has finished transmit-
ting the data, press EXIT. The bottom line of the
SY99 display will show "Completed!".
If the SY99 did not receive any MIDI bulk
data, the bottom line of the display will show
"Recording Canceled!". Make sure that the
external device is actually transmitting bulk
data, check MIDI connections, and try again.
Remarks: MIDI bulk data that has been received
into the SY99 MDR memory is preserved even
when the power is turned off. However as a pre-
caution against accidents, we suggest that you
use the following 3.Save to disk operation to
save the MDR memory to a disk file.
to select an empty data
to scroll the dis-
281