Yamaha SY99, Руководство пользователя, Страница: 240 / 344

SONG MODE
Summary: Specify whether the SY99's sequencer
will be controlled by its own timing source or by
an external sequencer.
Procedure:
From: song setup job directory (JUMP #622)
Select: 02:MIDI Control (JUMP #624)
Specify: MIDI Control on or off.
To exit: to the song setup job directory press
EXIT.
MIDI Control (on, off): Normally you will leave
this set "off" so that the SY99 sequencer will
be controlled by its own timing clock and the
front panel sequencer control buttons.
If you want to use an external sequencer
connected to the SY99's MIDI IN to control the
SY99 sequencer, set this "on" so that the SY99
sequencer will be controlled by MIDI start, con-
tinue, stop , song position pointer, and song
select messages, and the tempo will be deter-
mined by MIDI clock messages.
Remarks: When MIDI control is on, the SY99
sequencer will not run unless MIDI clock mes-
sages are being received.
Summary: Specify the accent level for each of the
four function keys F1-F4 used to specify the
accent of a note in song step record mode.
Procedure:
From: song setup job directory (JUMP #622)
Select: 03:Accent Level (JUMP #625)
Specify: each of the four accent levels.
To exit: to the song setup job directory press
EXIT.
Accent 1 - Accent 4 (1...127): These determine
the accent levels that will be selected when a
function key F1-F4 (Acc1-Acc4) is pressed
while in song step record mode.
Summary: Set the number of clocks per beat that
will be displayed in editing.
Procedure:
From: song setup job directory (JUMP #622)
Select: 04:Clock/Beat (JUMP #626)
Quantize (1/6, 1/8, 1/12, 1/16, 1/24, 1/32, 1/48,
1/64, 1/96); Specify the time value of one dis-
played beat.
This sets the number of clocks per beat that will be
displayed in editing. This has no effect on the time
signature, but is simply a convenience for editing.
229
SONG SETUP JOBS
2. MIDI control
JUMP #624
SONG SETUP JOBS
3. Accent level
JUMP #625
SONG SETUP JOBS
4. Clock/Beat
JUMP #626