Yamaha SY99, Руководство пользователя, Страница: 221 / 344

SONG MODE
Change the location of the data: In addition to the
data values for each type of data, you can also
modify the location (measure, beat, clock) to
move the data in time.
Change the data values: The following section
Song edit (data insert) explains the values
which can be modified for each type of data.
After modifying the data values and/or location,
be sure to press ENTER if you wish to finalize
the change.
Top/end of Track: To indicate the beginning or end
of the track, the display will show "Top of
Track" or "End of Track". This data cannot be
changed.
Measure marks: When a measure mark
("Meas.Bar") is displayed, you can move the
cursor to the time signature and modify it. If you
modify the time signature of a measure, the
location of all subsequent measure marks will be
affected.
This will not affect the musical data in the
tracks. However it will determine how the
metronome is sounded when playing back or
recording. It may also be useful in the following
situation.
Most song edit jobs (pages 214 to 227)
require you to specify the area to be affected in
measures. If you want to use a song edit job on
an area which is not bounded by the existing
measure marks, you can edit a measure mark to
a suitable time signature (such as 1/16) so that
the measure marks now delimit the area where
you want to use the song edit job.
Summary: In song editing data insert mode, you can
insert any type of data into any location in the
selected track 1-15.
Procedure:
From: song mode (when the SONG LED is lit
red)
Press: EDIT
Select: a track 1-15
Press: F8 (Data) and then press Fl (Ins).
Specify: the type, parameters, and location of
the data you wish to insert.
To insert: the data press ENTER.
To exit: song edit mode and return to song play
mode press EXIT.
step record mode.
Used (0...100%): This displays the amount of
sequencer memory already used.
When the cursor is located in this area you can
move backwards and forwards through the data
in time (except in the Insert mode). If the current
measure is longer than four quarter notes (e.g., a
time signature of 10/8), a number will be
displayed here to indicate the section of the
measure now being displayed.
The measure bar represents one measure, and
vertical divisions represent one beat. A dot will
be displayed on the bar to indicate a 32nd note
area which contains data.
Measure (001...999): To move to another mea-
sure in the track, place the cursor here and
modify the data.
Time (01-08/4, 01-16/08, 01-32/16): This dis-
plays the time signature of the measure in the
track being edited.
Tempo is only displayed, and has no effect in
210
SONG EDIT
Song edit (data insert)