Yamaha SY99, Руководство пользователя

Страница: 143 / 344

VOICE EDIT MODE
COMMON DATA
15. Initialize voice
Summary: Initialize the Voice Common data being
edited to a set of standard values. The Voice
Mode will not change.
Procedure:
From: Voice Common job (JUMP #201)
directory
Select: job 15:Init
To execute: initialization press YES
To quit: without initializing press NO
This function sets all voice common data values to
the minimum or simplest possible settings. When
creating your own new voices, it is usually best to
begin by editing an existing voice. However if you
want to start from scratch, this Initialize function
can often be helpful.
If you are sure you want to initialize the voice
data, press YES and the voice common data of the
voice being edited will be set to the values shown
below. If you decide not to initialize, press NO.
This function initializes only Voice Common data.
Other initialize functions are provided for initializing
AFM Element or AWM Element data. Refer to
Voice AFM Element 15. Initialize or Voice AWM
Element 15. Initialize.
Initialized settings for Voice Common Data
01 Element Levels
Voice Volume = 127
Element level = 127 (all elements)
02 Element Detune
Element detune = ±0 (all elements)
03 Element Note Shift
Shift = ±0 (all elements)
INITIALIZE VOICE
ARE YOU SURE ?
<Yes or No>
04 Element Note Limit
Low Limit = C-2 (all elements)
High Limit = G8 (all elements)
05 Element Velocity Limit
Low Limit = 1
High Limit = 127
06 Element Dynamic Pan
Element Preset 1-01 "Center" (all elements)
(Pan Source = velocity. Source Depth = 0,
Pan EG; HT=0, R1-RR2=63, L0-RL2=0,
SLP=S1)
07 Output Select
Output Group = Both (all elements)
08 Random Pitch
Random Pitch Depth = 0
09 Portamento
Mode = Follow (poly)/ Fingered
(mono)
Speed = 0
10 Effect Set
Effect Mode = off
Effect Type = 01:Rev.Hall (both effect units)
Output Level = 100% (both effect units)
Effect 2 Mix Level = 100%
wet:dry = 50:50 (both effect units)
Control Parameter = EFF1 par1
(both effect units)
Control Device = off (both effect units)
Control MIN 0% (both effect units)
Control MAX = 99% (both effect units)
Effect LFO Wave = triangle
Effect LFO Speed =65
Effect LFO Delay Time = 0
Effect LFO Initial Phase = free
Effect send select = all on (all elements)
Effect send level =127 (all elements)
Effect send vel sense = 0 (all elements)
Effect send level scale = 0 (all elements)
132