manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 269 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 269

13: TRANSPOSE

Transposes all notes in the specified track and range of measures up or down by

the specified “offset” in semitones.

This job is not available when the rhythm track (track 9) is selected.

Meas (First & last measure numbers)

Range: 001 ... 999
Controls: [CS6], [CS7], [-1] [+1], Dial

Ofst (Offset)

Range: -99 ... +99
Controls: [CS8], [-1] [+1], Dial

Use the GROUP [A] through [H] keys to select the track on which the

transpose operation is to be performed (A = track1, B = track 2, and so on).
The LED of the selected track will glow red while the LEDs of all other tracks
containing data glow green.

Use [CS6] and [CS7] to specify the first and last measure numbers in the

range of measures over which you want to transpose note data. Use [CS8] to
set the number of semitones by which the notes will be transposed up or down.
Minus (-) values transpose down while plus (+) values transpose up.

Press [ENTER/YES] to begin the transpose procedure. The following confir-

mation display will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

transpose operation, or press [EXIT/NO] to cancel.

When the data has been transposed, “Completed!” will appear briefly on the

display.

196 

SONG EDIT MODE / 

SONG JOB

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов