manualshive.com logo in svg

Yamaha SY85, Руководство пользователя, Страница: 265 / 424

Поделиться
Скачать
Yamaha SY85 Скачать руководство пользователя страница 265

10: ERASE MEASURE

the specified track.

This job is not available when the rhythm track (track 9) is selected.

Erases all note and event data from the specified measure or range of measures in

Meas (First & last measure numbers)

Range: 001 ... 999

Controls: [CS7], [CS8], [-1] [+1], Dial

Use the GROUP [A] through [H] keys to select the track containing the

measures you want to erase (A = track1, B = track 2, and so on). The LED of
the selected track will glow red while the LEDs of all other tracks containing
data glow green.

Use the [CS7] and [CS8] sliders to select the numbers of the first and last

measures in the range of measures you want to erase.

Press [ENTER/YES] to begin the erase procedure. The following confirma-

tion display will appear:

Press [ENTER/YES] again to confirm that you want to go ahead with the

erase operation, or press [EXIT/NO] to cancel.

When the data has been erased, “Completed!” will appear briefly on the

display.

An erase operation leaves the specified measures intact but blank.

192

 

SONG EDIT MODE / 

SONG JOB

Содержание SY85









































































































































































































































































































































































































































Отзывы:

Нет отзывов