Instrument an
d
control functions
4-24
4
EAU4951B
Brake lever
The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
lever and the throttle grip, slightly pull
the brake lever away from the throttle
grip and rotate the adjusting dial. Make
sure the setting number on the adjust-
ing dial aligns with the match mark on
the brake lever.
Unifie
d
b
rake system (UBS)
When pulling the brake lever, the front
brake and a portion of the rear brake
are applied. For full braking perfor-
mance, apply both the brake lever and
the brake pedal simultaneously.
The unified brake system is monitored
by an ECU, which disables unified
braking and resumes conventional
braking if a malfunction occurs.
TIP
UBS does not function until the
vehicle starts moving. However,
after coming to a stop while apply-
ing the brake lever, UBS will re-
main engaged. As UBS applies
only a portion of the rear brake,
depress the brake pedal when
stopping on a steep or slippery
slope.
UBS will disengage when stopped
and the brake lever is released.
UBS does not function when the
brake pedal is applied before the
brake lever.
UBS is activated via the front
brake lever only.
Resistance and vibration may be
felt in the brake pedal when UBS
is engaged.
1. Brake lever
2. Brake lever position adjusting dial
3. Match mark
4. Distance
5
4
3 2
1
1
4
3
2
UBUY10E0.book Page 24 Tuesday, October 4, 2022 10:55 AM
Содержание Super Tenere ES 2023
Страница 130: ...UBUY10E0 book Page 3 Tuesday October 4 2022 10 55 AM...
Страница 132: ...DIC183 PRINTED IN JAPAN 2022 10 0 3 1 CR E...