Instrument an
d
control functions
3-34
3
3. Install the rider seat height posi-
tion adjuster so that the match
mark is aligned with the “H” mark
as shown.
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
TIP
Make sure that the rider seat is proper-
ly secured before riding.
EAU58982
Win
d
shiel
d
To suit the rider’s preference, the wind-
shield can be changed to one of four
positions.
To a
d
just the win
d
shiel
d
hei
g
ht
1. Loosen the windshield height po-
sition adjusting knob on each side
of the windshield until resistance
is felt.
NOTICE:
Do not continue
turnin
g
the kno
b
after resis-
tance is felt. Otherwise, the
kno
b
coul
d
b
e
d
ama
g
e
d
.
[ECA20211]
2. Pull the slide plate holders out-
ward, and then adjust the height of
the windshield.
3. Align the slide plate holders with
the match marks at the desired
position.
1. Rider seat height position adjuster
2. “H” mark
3. Match mark
1. Projection
2. Seat holder B (for high position)
2
3
1
1
2
1. Windshield height position adjusting knob
1. Slide plate holder
1
1
UBP9E1E0.book Page 34 Friday, September 7, 2018 10:01 AM
