manualshive.com logo in svg

Yamaha SU200, Руководство пользователя, Страница: 54 / 62

Поделиться
Скачать
Yamaha SU200 Скачать руководство пользователя страница 54

 

54

 

Reference

 

Troubleshooting

 

Problem

Possible Cause

 

No sound

• Is your playback device (powered speakers, etc.) correctly con-

nected?

• The volume on the SU200 or the playback device may be set too

low.

• The pad volume setting (see page 51) may be too low.
• Check that batteries are correctly installed, or that the power

adaptor is correctly connected. (See page 12.)

• Are batteries fresh? If batteries are old, try replacing them.
• You may be trying to play an empty pad (a pad that does not

contain a recorded sample).

• Are the sample’s start and end points set correctly?
• If you are using the filter, try changing the cutoff (see page 37).

Some cutoff settings may cause all sound to go off.

Sound is distorted.

• The volume on the SU200 or the playback device may be set too

high.

• Are batteries fresh? If batteries are old, try replacing them.
• Use of an effect or filter at certain settings may produce distor-

tion. (See page 36.)

• You may have set the input level too high when you were

recording the sample.

Loop-Track Play doesn’t start 
when the [LOOP TR PLAY] but-
ton is pressed.

• The clock setting may be set to 

 

EXT

 

 (see page 39). 

Cannot record samples.

• Is LINE INPUT or MIC INPUT correctly connected? (See page

10.)

• The Protect function may be on. (See page 53.)

Cannot start sample recording 
(AUTO start).

• The trigger level may be set too high. (See page 23.)

Sample recording starts too soon 
(AUTO start).

• The trigger level may be set too low. (See page 23.)

Available sampling time seems 
too low.

Sampling memory is running low. You can economize on memory
use as follows.
• Reduce the sampling grade. (See pages 22, 24.)
• Record in MONO rather than STEREO. (See pages 22, 24.)
• Delete unnecessary samples. (See page 34.)

Cannot control the SU200 from 
an external MIDI device.

• Be sure that the SU200’s MIDI channel setting matches the

channel setting of the external device. (See page 39.)

• Be sure that the clock setting is set to 

 

EXT

 

. (See page 39.)

Cannot play SU200 samples from 
an external MIDI keyboard.

• Be sure that the SU200’s MIDI channel setting matches the

channel setting of the external device. (See page 39.)

• Remember that the SU200’s 24 virtual pads (3 banks 

 

×

 

 8 pads)

are mapped to the 24 white keys from C1 to E4 on the external
keyboard. Keys outside of this range do not produce any sample
playback.

Содержание SU200































































Отзывы:

Нет отзывов