Yamaha SU200 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 62

Yamaha SU200 Скачать руководство пользователя страница 28

28

Chapter 2 Playing the Pads

Gate/Trigger Setting

This setting determines whether the pad acts as a gate or a trigger.

●

Gate

........................... The sample plays out only while the pad is held down.

●

Trigger

....................... Press the pad once to start playback; you can then release the pad while playback continues.

If you want to cut the sample off while playback is in progress, press the pad again.

Make the setting using the [GATE/TRIGGER] button. First press the pad you want to set. Then (while the
sample is still playing, or after it has finished) press the [GATE/TRIGGER] button as necessary so that

GATE

or

TRG

appears on the display.

Sample playback stops immediately when the pad is released.

To cut off the playback, press the
same pad again.

Playback continues after you release the pad.

GATE

TRIGGER

STEREO/MONO

Chapter 2 Playing the Pads

This chapter explains sample playback methods and loop setup.

The SU200 offers the following pad playback methods.

●

Change the way the pad plays its sample.

→

Gate/Trigger Setting............................................................................................... See below on this page.

●

Play the sample once only, or play repeatedly (as a loop).

→

One-shot/Loop Setting............................................................................................................. See page 29.

●

Play the sample forward or in reverse.

→

Normal/Reverse Setting ............................................................................................................ See page 29

●

Set the section of the sample that plays back.

→

Start Point and End Point Settings .......................................................................................... See page 30

• The above settings must be made separately for each pad. When you enter a new setting, that

setting applies to the selected pad only. (If you have not used the [Hold] feature, the setting
applies to the last pad that you pressed. If you have used the [Hold] feature, the setting
applies to the held pad.)

●

Select a specific pad whose settings you want to change.

→

[HOLD] button ......................................................................................................................... See page 32.

●

Play samples that were recorded at different tempos all at the same tempo.

→

Loop-Track Play................................................................................................................ See pages 18, 32.

NORMAL

REVERSE

START

POINT

END

POINT

POINT
CLEAR

TIME

DELETE

EXTRACT

ONE SHOT

LOOP

GRADE

GATE

TRIGGER

STEREO/MONO

LOOP TR

PLAY

NOTE

«
...
26
27
28
29
30
...
»

Содержание SU200































































Отзывы:

Нет отзывов