![background image](http://html1.mh-extra.com/html/yamaha/studio-manager/studio-manager_owners-manual_3471381010.webp)
10
Studio Manager for V2 DM2000 Editor—Owner’s Manual
Layer Windows
The DM2000 Editor’s Layer window displays 24 channel strips. You can select a layer using the LAYER
buttons in the Master window. To open the Layer window, choose [Layer] from the [Windows] menu.
Input Channels
Selecting the 1-24, 25-48, 49-72, or 73-96 LAYER button in the Master window displays
the corresponding Input Channel strips.
A
SOURCE parameter
This parameter is used to select an Input source. To select an Input source, click the
parameter and choose from the list that appears.
B
Routing buttons
These buttons are used to route the Input Channel to the Bus Outs.
C
[STEREO] button
This button is used to route the Input Channel’s signal to the Stereo Out.
D
[DIRECT] button
This button turns on and off the Input Channel’s routing to its Direct Out.
E
Direct Out parameter
This parameter is used to select the Direct Out destination. To select a destination,
click the parameter and choose from the list that appears.
F
[PHASE] button
This button is used to reverse the signal phase of the channel.
G
[INSERT] button
This button is used to turn on and off the Input Channel’s Insert.
H
[GATE] button
This button is used to turn on and off the Input Channel’s Gate.
I
Gate open/close indicators
These indicators display whether the Gate is open (green) or closed (red).
J
Gate threshold
This displays the Gate Threshold, which can be set by dragging.
K
[COMP] button
This button is used to turn on and off the Input Channel’s Compressor.
L
Compressor curve
This display shows the Compressor’s curve.
M
[EQ] button
This button is used to turn on and off the Input Channel’s EQ.
N
EQ curve
This display shows the Equalizer’s curve, which can be set by dragging.
O
[DELAY] button
This button is used to turn on and off the Input Channel’s Delay function.
P
Delay parameter
This parameter is used to set the delay time of the Delay function. Delay times can be
set by dragging.
Note:
• You can selectively turn on or off some of channel strips by using the [View] menu.
• You can open multiple Layer windows. The second and subsequent open windows will indicate
“Locked” in the title, which means that these windows do not reflect layer selections made on the console
or in the Master window. If you want the Layer windows to reflect the changes, right-click each window
(Macintosh: <control> + click), then select the desired layer using the LAYER buttons.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
V
W
X
Y
Z
a