INSTRUMENT AND CONTROL FUNCTIONS
4-1
4
EAU10450
Main switch
The main switch controls the ignition
and lighting systems. The various main
switch positions are described below.
EAU10510
ON
All electrical systems are supplied with
power, and the headlight, meter light-
ing, taillight and position lights come
on, and the engine can be started. The
key cannot be removed.
EAU45751
OFF
All electrical systems are off. The key
can be removed.
WARNING
EWA10072
Never turn the key to “OFF” while
the vehicle is moving, otherwise the
electrical systems will be switched
off, which may result in loss of con-
trol or an accident.
EAU10810
P (Parking)
The taillight and position lights are on,
but all other electrical systems are off.
The key can be removed.
The key must be pushed in from the
“OFF” position to be turned to “P”.
NOTICE
ECA11020
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.
EAU10981
Indicator lights
EAU11020
Turn signal indicator light “
”
This indicator light flashes when the
turn signal switch is pushed to the left or
right.
EAU11060
Neutral indicator light “
”
This indicator light comes on when the
transmission is in the neutral position.
1. Neutral indicator light “
”
2. Turn signal indicator light “
”
3. High beam indicator light “
”
3
2
1
U46B13E0.book Page 1 Monday, September 12, 2011 1:30 PM
