Yamaha STAGEPAS 1K, Руководство пользователя

Страница: 14 / 28

Combining Two STAGEPAS 1K Units
14
STAGEPAS 1K Owner’s Manual
Combining Two STAGEPAS 1K Units
Playing sound in stereo
You can use two STAGEPAS 1K units to play sound in
stereo.
1.
Connect the [LINK] output jack of the
L-channel STAGEPAS 1K to the [LINK] input
jack of the R-channel STAGEPAS 1K.
Use the L-channel STAGEPAS 1K to input an audio
signal from the source.
NOTE
A signal input to the R-channel STAGEPAS 1K (on
channels 1–3 or ST) will be played only from the R-channel
speaker.
2.
Press the [MONO/ST MODE] switch to
engage STEREO mode.
The [STEREO] LED lights in STEREO mode.
Expanding the number of
STAGEPAS 1K input channels
You can double the number of input channels by
connecting two STAGEPAS 1K to each other.
Each STAGEPAS 1K will operate as monaural.
1.
Connect the [LINK] input jack and the [LINK]
output jack of one of the STAGEPAS 1K units
to the [LINK] output jack and [LINK] input
jack of the other unit.
2.
Press the [MONO/ST MODE] switch to
engage MONO mode on both units.
The [STEREO] LED turns off in MONO mode.
R-channel L-channel
STAGEPAS 1K
(1st unit)
STAGEPAS 1K
(2nd unit)
Off
Off