Yamaha SRT-1500 Скачать руководство пользователя страница 63

Страница: 63 / 74

APPENDIX

➤

Troubleshooting

Remote control

Cannot make a

Bluetooth

connection.

Receiving/transmitting

“Bluetooth” is set to “Off”.

Set it to “On”.

Another

Bluetooth

device is connected.

The unit cannot make multiple

Bluetooth

connections. Terminate current

Bluetooth

connection, and make connection for the desired device.

More than 20 devices are paired and the oldest pairing information is
deleted.

Perform pairing again. The unit can be paired with up to 20

Bluetooth

devices for receiving and transmitting audio. If a new device is successfully
paired with the unit after 20 other devices have already been paired, the
device with the earliest connecting date will have been unpaired to make
room for the new device.

Transmitting

Attempted to establish a connection during playback with AirPlay.

Terminate AirPlay playback and try again to establish a connection.

No sound is produced or the sound is intermittent during playback.

Receiving/transmitting

The

Bluetooth

connection of the unit with the device is disconnected.

Perform

Bluetooth

connection operations again.

The unit and device are too far apart.

Move the

Bluetooth

device so that it is less than 10 m (33 ft) from this unit.

26, 28

There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.

Move this unit away from the device that is emitting radio frequency signals.

–

The device’s

Bluetooth

function is off.

Enable the

Bluetooth

function of the device.

–

The device’s volume is set to minimum.

Turn up the volume level on the device.

–

Receiving

The device is not set to send

Bluetooth

audio signals to the unit.

Check that the

Bluetooth

function of the device is set properly.

–

Playback on the device has not been performed.

Perform playback on the device.

–

Transmitting

Transmitted audio does not play.

Play audio from the device selected with the input selector key.

Problem

Cause

Remedy

See page

The remote control does not work
and/or function properly.

The wrong distance or angle.

The remote control functions within a maximum range of 6 m (20 ft) and no
more than 30 degrees off-axis from the front panel.

Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this unit.

Reposition this unit.

–

The batteries are weak.

Replace all batteries.

Problem

Cause

Remedy

See page

Содержание SRT-1500











































































Результаты поиска

Содержание SRT-1500

Отзывы:

Похожие инструкции для SRT-1500

Бренды по названию

Популярные бренды

Yamaha SRT-1500, Руководство пользователя

Результаты поиска

Содержание SRT-1500

Отзывы:

Похожие инструкции для SRT-1500

Бренды по названию

Популярные бренды