Yamaha SR400 2022 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 96

Yamaha SR400 2022 Скачать руководство пользователя страница 66

Perio

d

ic maintenance an

d

a

d

justment

7-25

7

EAU22762

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.

EAU59595

To check the

d

rive chain slack

1. Place the motorcycle on the cen-

terstand.

2. Shift the transmission into the

neutral position.

3. Push on the drive chain at the cen-

ter point between the drive axle
and the rear wheel axle.

4. Measure the drive chain slack as

shown.

5. If the drive chain slack is incorrect,

adjust it as follows.

NOTICE:

Im-

proper

d

rive chain slack will

overloa

d

the en

g

ine as well as

other vital parts of the motorcy-
cle an

d

can lea

d

to chain slip-

pa

g

e or

b

reaka

g

e. To prevent

this from occurrin

g

, keep the

d

rive chain slack within the

specifie

d

limits.

[ECA10572]

EAU59643

To a

d

just the

d

rive chain slack

Consult a Yamaha dealer before ad-
justing the drive chain slack.

1. Take the motorcycle off the cen-

terstand, and then put the side-
stand down.

2. Loosen the brake pedal free play

adjusting nut, brake torque rod
nut, and axle nut.

3. Loosen the drive chain puller lock-

nut at each end of the swingarm.

4. Place the motorcycle on the cen-

terstand.

5. To tighten the drive chain, turn the

drive chain slack adjusting bolt at
each end of the swingarm in direc-
tion (a). To loosen the drive chain,
turn the adjusting bolt at each end
of the swingarm in direction (b),
and then push the rear wheel for-
ward.

1. Drive chain slack

1

Drive chain slack:

30.0–40.0 mm (1.18–1.57 in)

1. Brake pedal free play adjusting nut
2. Drive chain slack adjusting bolt
3. Drive chain puller locknut
4. Axle nut
5. Brake torque rod nut
6. Brake torque rod

6

1

2

3

4

5

UB9FEYE0.book Page 25 Monday, July 12, 2021 5:47 PM

«
...
64
65
66
67
68
...
»

Содержание SR400 2022

































































































Отзывы:

Нет отзывов