Yamaha SPX1000, Руководство по эксплуатации

Страница: 27 / 79

PARAMETERS ACCESSED BY THE PARAM KEY
25. PAN
This is a very sophisticated pan program that allows creation
of “rotary” pan in addition to straightforward pan effects.
Pan Type (TYPE): L R, L R, L R, L-TURN,
R-TURN
Determines the direction in which the sound sweeps across the
stereo sound field. The L-TURN and R-TURN parameters
produce a pan which seems to rotate toward and away from
the listener in the specified direction.
Pan Speed (PAN SPEED): 0.05 – 40 Hz
Sets the speed of the PAN effect (i.e. how rapidly the signal
sweeps from channel to channel).
Front/Rear Depth (F/R DEPTH): 0
–
100%
When the L-TURN or R-TURN pan type is selected, this
parameter sets the apparent depth of the sweep from front to
rear.
Left/Right Depth (L/R DEPTH): 0 – 100%
Sets the “depth” of the pan sweep from left to right and right
to left.
26. TRIGGERED PAN
When triggered, this program automatically pans the sound
image between left and right or right and left in the stereo
sound field – with programmable attack, pan and release
rates.
Trigger Level (TRG. LEVEL): 1 – 100%
Determines the level of the input signal required to trigger the
panning effect. At 100% only very high-level input signals
will trigger the pan, while at 0% even the tiniest input signal
will trigger the pan.
Trigger Delay (TRG. DLY): -100 – +100 milliseconds
Produces a delay between the time at which the effect is
triggered and that at which it actually begins. If a minus value
is programmed, the input signal is delayed so that, effectively,
the effect begins before the signal appears.
24
Trigger Mask (TRG. MSK): 3 – 24000 milliseconds
This parameter makes it impossible to re-trigger the effect
until the programmed time has elapsed.
Attack Time (ATTACK): 3 – 24000 milliseconds
Determines how rapidly the panning effect begins.
Panning Time (PANNING): 3 – 24000 milliseconds
Determines how long it takes to complete the main portion of
the pan.
Release Time (RELEASE): 3 – 24000 milliseconds
Determines the speed of the end of the pan.
Pan Direction (DIRECTION): L R, L R
Determines the direction in which the sound sweeps across the
stereo sound field.
Left/Right Channel Balance (L/R BALANCE): 0 –
100%
Determines the maximum extent of the pan sweep. For
example, a setting of 100% produce a full pan from the
extreme left to right or vice versa, while a setting of 50% a
pan that is more restricted in its width across the stereo sound
field.
Analog Trigger Level (A. TRG LEVEL): 0 – 100%
When an analog signal applied to the rear-panel TRIGGER 2
ANALOG jack is used to trigger the pan effect, this parameter
determines the level of the input signal required to trigger the
effect. At 100% only very high-level input signals will trigger
the effect, while at 1% even the tiniest input signal will trigger
the effect. When this function is used the TRG. LEVEL
parameter should be set to the highest value (100%) so that
only signals applied to the TRIGGER 2 ANALOG jack will
activate the effect.
MIDI Trigger (MIDI TRG.): OFF, ON
When this parameter is turned ON, a KEY ON EVENT
message from an external MIDI keyboard can be used to
trigger the pan. A KEY ON EVENT message is transmitted
whenever a note on a MIDI keyboard is played.
NOTE:
This effect can also be triggered by the front-panel
TRIGGER key or a footswitch plugged into the rear-panel
TRIGGER 1 SW jack.