![background image](http://html.mh-extra.com/html/yamaha/sound-editor-ver-2-10/sound-editor-ver-2-10_effect-list_903214004.webp)
4
Effect Parameters
Distortion
Advanced distortion. Mainly used for direct connection to guitar amp’s front input.
Digital Distortion
Distortion effect. Mainly used for direct connection to guitar amp’s front input.
Parameter
Display
Range
Description
Type
TYPE
Lead1, Lead2, Drive1, Drive2,
Crunch1, Crunch2, Fuzz1,
Fuzz2, Distortion1, Distortion2,
Overdrive1, Overdrive2, Tube,
Solidstate
Distortion type
Gain
GAIN
0.0 to 10.0
Adjusts the amount of distortion
Master
MSTR
0.0 to 10.0
Adjusts the volume
Tone
TONE
0.0 to 10.0
Adjusts the tone
EQ 1 Freq.
EQ1F
50.0 to 400 Hz
Specifies the post effect EQ1 frequency
EQ 1 Gain
EQ1G
-12.0 to 12.0 dB
Specifies the post effect EQ1 gain
EQ 1 Q
EQ1Q
0.100 to 20.0
Specifies the post effect EQ1 Q (bandwidth)
EQ 2 Freq.
EQ2F
200 to 1.60 kHz
Specifies the post effect EQ2 frequency
EQ 2 Gain
EQ2G
-12.0 to 12.0 dB
Specifies the post effect EQ2 gain
EQ 2 Q
EQ2Q
0.100 to 20.0
Specifies the post effect EQ2 Q (bandwidth)
EQ 3 Freq.
EQ3F
600 to 4.80 kHz
Specifies the post effect EQ3 frequency
EQ 3 Gain
EQ3G
-12.0 to 12.0 dB
Specifies the post effect EQ3 gain
EQ 3 Q
EQ3Q
0.100 to 20.0
Specifies the post effect EQ3 Q (bandwidth)
EQ 4 Freq.
EQ4F
2.00 k to 16.0 kHz
Specifies the post effect EQ4 frequency
EQ 4 Gain
EQ4G
-12.0 to 12.0 dB
Specifies the post effect EQ4 gain
EQ 4 Q
EQ4Q
0.100 to 20.0
Specifies the post effect EQ4 Q (bandwidth)
Pre EQ Level
PELV
0.0 to 10.0
Specifies the pre effect EQ level
Pre EQ 1 Freq.
PE1F
50.0 to 500 Hz
Specifies the pre effect EQ1 frequency
Pre EQ 1 Gain
PE1G
-12.0 to 12.0 dB
Specifies the pre effect EQ1 gain
Pre EQ 1 Q
PE1Q
0.100 to 20.0
Specifies the pre effect EQ1 Q (bandwidth)
Pre EQ 2 Freq.
PE2F
200 to 2.00 kHz
Specifies the pre effect EQ2 frequency
Pre EQ 2 Gain
PE2G
-12.0 to 12.0 dB
Specifies the pre effect EQ2 gain
Pre EQ 2 Q
PE2Q
0.100 to 20.0
Specifies the pre effect EQ2 Q (bandwidth)
Pre EQ 3 Freq.
PE3F
1.00 k to 10 kHz
Specifies the pre effect EQ3 frequency
Pre EQ 3 Gain
PE3G
-12.0 to 12.0 dB
Specifies the pre effect EQ3 gain
Pre EQ 3 Q
PE3Q
0.100 to 20.0
Specifies the pre effect EQ3 Q (bandwidth)
N. G. Threshold
NGTH
0.0 to 10.0
Level at which the noise gate activates
N. G. Attack
NGAT
0 to 120 ms
Time required for the noise gate to open after signal exceeds threshold
N. G. Hold
NGHL
0.02 to 2040 ms
Time noise gate stays open
N. G. Decay
NGDC
6 to 44500 ms
Time required for the noise gate to close after signal goes below thresh-
old
Parameter
Display
Range
Description
Type
TYPE
Distortion1, Distortion2,
Overdrive1, Overdrive2,
Crunch
Distortion type
Drive
DRV
0 to 100
Distortion drive
Master
MSTR
0 to 100
Master volume
Tone
TONE
–10 to +10
Tone
Noise Gate
NG
0 to 20
Noise reduction
Содержание Sound Editor ver. 2.10
Страница 1: ...1 EFFECT LIST ver 2 10 ...