Yamaha SEQTRAK Скачать руководство пользователя страница 15

Страница: 15 / 99

SEQTRAK User Guide

[OCTAVE] button

Used to change the pitch of the currently selected Synth key by one octave.

[SCALE] button

Used to change the scale that is used when the Synth keys are pressed.

[KEY] button

Used to change the key that is used when the Synth keys are pressed, in half steps.

[REC SAMPLE] button

Used for sampling on the SAMPLER track.

–

Top Right (Sound Design & FX section)

Index

Displays the selected parameter or mode.

Global Meter

Displays the value of the parameter being operated or the operating status while
saving/loading data.

[UNDO/REDO] button

Used to UNDO/REDO sound and effect parameter changes.

Sound Design knobs 1–4

Turn these knobs to change the sound of a track or adjust parameters.

Sound Design Page button

Press to switch between the sound parameters controlled by the Sound Design knobs.

Содержание SEQTRAK




































































































Результаты поиска

Содержание SEQTRAK

Отзывы:

Yamaha SEQTRAK, Руководство пользователя, Страница: 15 / 99

Результаты поиска

Содержание SEQTRAK

Отзывы: