background image

Introduction

The Seascooter™ Scout gives kids a totally new experience 

- power performance for fun and excitement in the pool. 
The Seascooter™ Seal & Explorer adds a new dimension of 

fun and excitement to swimming and snorkeling.

Only use The SEASCOOTER™ Seal, Explorer & Scout in 

a pool or in calm water and close to shore – DO NOT 

use in the open sea.
Use appropriate equipment such as wetsuit, approved 

life jacket, mask & snorkel etc. when using seascooter.
Only operate the Seascooter in water.

-Scout-

• Speed up to Up to 1 mph (1.6 km/h)
• Run up to 1 hour with normal use
• Rated to 10ft/3m
• Weight just 7.5 lbs (3.4 kg) including battery

-Seal-

• Speed up to Up to 2 mph (3.2 km/h)
• Run up to 1.5 hours with normal use
• Rated to 15ft/5m
• Weight just 12 lb (5.4 kg) including battery

-Explorer-

• Speed up to Up to 2.5 mph (4.0 km/h)
• Run up to 1 hours with normal use
• Rated to 30ft/10m
• Weight just 11.5 lb (5.2 kg) including battery
The  Seascooter™ Scout, Seal & Explorer feature various 

safety features making it safe for kids ages 8 and up. These 

are positive buoyancy, protective grilles, auto shut off when 

triggers are released and safety lock.
Please study this manual to get the most out of your 

Seascooter™ Scout / Seal / Explorer.

1

2

 

The Seascooter is designed for use in seawater. It will 

have less buoyancy in fresh water, lake or pool and 

may sink in such waters.

Содержание Seascooter Explorer
















Отзывы: