Yamaha S90, Руководство пользователя

Страница: 61 / 139

61
Basics Section
Quick Guide
Refer
ence
Appendix
Voice Edit
Common Edit and Editing Individual
Elements
Switching Elements (or Keys)
On/Off (Mute)
Voices can consist of up to four Elements (page 26).
Use Common Edit to edit the settings common to all
four Elements.
To edit parameters common to all four elements, press
the [DRUM KITS] button (which serves as a
“COMMON” button here).
To edit parameters of the individual elements, select
the desired element with the corresponding NUMBER
button ([1] - [4]).
You can mute other elements (those you aren’t
editing and don’t wish to hear) by using the
NUMBER [9] - [12] buttons (Normal Voice only).
Muted elements are indicated by lit buttons; the
indicator of the button corresponding to the muted
element lights.
To solo an element
Simultaneously hold down the [MUTE] button and
press one of the NUMBER buttons [9] to [12] to solo
the corresponding element.
Once you’ve selected an element for soloing, the
[MUTE] button’s lamp flashes, indicating the Solo
function is active. While Solo is active, you can
change the soloed element simply by pressing the
corresponding NUMBER button [9] to [12].
To exit from the Solo function, press the [MUTE]
button again.
Switching Between Screens and
Entering Settings
1
Select the menu you wish to edit by pressing
the [F1] - [F6] and [SF1] - [SF5] buttons.
2
Select the desired parameter by using
[
▲ ▼
EF
] buttons.
3
Use the [INC/YES] and [DEC/NO] buttons to
set each parameter value.
n
For details about the Edit indicator, see page 39.
Compare Function
Use this to listen to the difference between the
Voice/Performance with your edited settings and the
same Voice/Performance prior to editing.
1
Press the [COMPARE (EDIT)] button while in
Edit mode. The EDIT LED will flash and the
settings prior to editing will temporarily be
reinstated for comparison purposes.
(The
indicator is shown at the top of the
display in place of the indicator.)
n
While the Compare function is enabled, the [DEC/NO]
and [INC/YES] buttons cannot be used for editing.
2
Press the [EDIT] button again to disable the
Compare function and restore your recently
edited settings.
n
The Compare function is also available in the
Performance Edit mode.
DRUM KITS
FAVORITES
COMMON
1 2 3 4
9 10 11 12
ELEMENT / PERF.PART / ZONE
Element mute setting
Element selection
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
TRACK
SELECT
MUTE
SOLO
ELEMENT / PERF.PART / ZONE