manualshive.com logo in svg

Yamaha RY30, Уполномоченное руководство по продукции

Поделиться
Скачать
Yamaha RY30 Скачать руководство пользователя страница 64

PATTERN MODE

Settings: 

Source pattern number: 000 . . . 199

Destination pattern number: 000 . . . 099
Voice: Any voice used in the source pattern —

I00 . . . I95 (internal), C00 . . . C31 (card)

Procedure: 

Use the and keys to move the

cursor to the source or destination pattern num-
ber, or to the voice parameter (the voice number

appears on the top line of the display when the
voice parameter is selected). Use the [INC] and

[DEC] keys, the [DATA] slider, or the numeric
keys to set the parameters as required. The
instrument pads can be used to select the voice

to be copied.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to copy the voice or press [EXIT] to can-
cel the operation. “Complete!” will appear on
the display briefly when the voice has been
copied.

Notes: 

If, for example, you have a great hi-hat line

in one pattern that you want to use in a different

pattern, the PATTERN VOICE COPY function

lets you copy only the desired hi-hat part from

the original pattern to the new pattern.

The selected voice is copied to the destina-

tion pattern without altering the data already in

the destination pattern.

JOB 03: PATTERN INST CHANGE

If you specify a source pattern that does not

contain the selected voice, the “!No Data Con-

verted!” error message will appear on the display

when the operation is executed, and the opera-

tion will be cancelled.

if- there is not enough pattern memory available

to complete the operation. If the pattern pro-

duced by the copy operation is too large, “! Too

Large Pattern!” will appear on the display.

“! Memory Full !” will appear on the display

Procedure: 

Use the and keys to move the

cursor to the pattern number or voice parameter
(the voice number appears on the top line of the
display when the voice parameter is selected).
Use the [INC] and [DEC] keys, the [DATA]

slider, or the numeric keys to set the parameters
as required. The instrument pads can be used to
select the voice to be cleared.

Press the [ENTER] key — “Sure” will

appear on the display. Press the [ENTER] key
again to clear the voice or press [EXIT] to can-
cel the operation. “Complete!” will appear on
the display briefly when the voice has been
cleared.

Notes: 

Although you could use the [CLEAR] key to

remove all occurrences of the same instrument

from a pattern (see page 23), this job makes

clearing an entire instrument much easier.

If you specify a pattern that does not contain

the selected voice, the “!No Data Converted!”

error message will appear on the display when

the operation is executed, and the operation will

be cancelled.

Summary: 

Allows a voice used in the selected pat-

tern to be changed to any other voice.

Settings: 

Pattern number: 000 . . . 099

Old voice: Any voice used in the source pattern

— I00 . . . I95 (internal), C00 . . . C31 (card)

New voice: I00 . . . I95 (internal), C00 . . . C31

JOB 02: PATTERN INST DELETE

  

                                         (card)

Summary: 

Clears (erases) the selected voice from

the specified pattern.

Settings: 

Pattern number: 000 . . . 099

Voice: Any voice used in the source pattern —

I00 ... I95 (internal), C00 . . . C31 (card)

Procedure: 

Use the and keys to move the

cursor to the pattern number or voice parameter

(the voice number appears on the top line of the
display when the voice parameter is selected).
Use the [INC] and [DEC] keys, the [DATA]

slider, or the numeric keys to set the parameters
as required. The instrument pads can be used to
select the old and new voice.

56

Содержание RY30






























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды