background image

106

 En

USING NETWORK/USB FEATURES

Registering this unit on the YAMAHA 
MCX-2000

You must register this unit on your YAMAHA MCX-2000 
so that this unit can be recognized by your YAMAHA 
MCX-2000. For details, refer to the operation manual 
supplied with your YAMAHA MCX-2000.

1

Turn off this unit.

2

Set your YAMAHA MCX-2000 to the “Auto 
Config” mode.

3

Turn on this unit.

• MCX-2000 is added to the server list on the 

submenu of PC/MCX.

• The client ID of this unit appears in the OSD of 

your YAMAHA MCX-2000 (shown as CL-
XXXXX), and this completes the automatic 
configuration procedure.

• The latter part of the client ID of this unit is same as the last 5 

digits of the MAC address of this unit. For details about MAC 
address, see page 86.

• To clear the registered client ID of this unit, use the “Manual 

Config” mode of your YAMAHA MCX-2000 (refer to the 
instruction manual of MCX-2000) and then set “N-RESET” in 
the advanced setup menu of this unit to “RESET” (see page 91).

• The client control functions of MCX-2000 over this unit other 

than “View Play Info”, “Receive PCM Stream” and “Edit Client 
title” are not available. Avoid using these functions as it will 
stop the playback on this unit.

Use this feature to listen to Internet radio stations. This 
unit uses the vTuner Internet radio station database service 
particularly customized for this unit, providing over 2000 
radio station database. Further, you can store your favorite 
stations with bookmarks.

• This service may be discontinued without notice.
• Some Internet radio stations may not be played even if they are 

selected in the NET RADIO menu.

• To listen to the Internet radio, connect this unit to your network 

(see page 23).

• A narrowband Internet connection (i.e. 56K modem, ISDN) will 

not provide satisfactory results, and a broadband connection is 
strongly recommended (i.e. a cable modem, an xDSL modem, 
etc.). For detailed information, consult with your ISP.

y

• You can use 

h

 / 

s

 to start/stop playback independently from 

the menu in the OSD.

• “Podcast” is a type of the Internet radio service, and there are a 

number of Podcast services available on the Internet. The 
Podcast is not a continuous service. That is, this unit stops 
playback when an episode of the Podcast ends.

• Some security devices (such as firewall) may block the access 

of this unit to Internet radio stations. In such cases, configure 
the security settings appropriately.

Storing your favorite Internet radio 
stations with bookmarks

Use this feature to select your favorite Internet radio 
stations quickly.

Press and hold TITLE on the remote control while 
the selected Internet radio station service is 
being broadcast.

The stored Internet radio station is added to the 
“Bookmarks” list (see page 103).

y

To remove the stored station from the list, select the item in the 
first level of “Bookmarks” list and then press and hold TITLE on 
the remote control.

Notes

Using the Internet radio

Notes

Содержание RXN600BL





































































































































Отзывы: