Yamaha RX-V775, Руководство пользователя

Страница: 40 / 139

PREPARATIONS
➤
Optimizing the speaker settings automatically (YPAO)
En
40
2
Use the cursor keys to select “Save/Cancel” and
press ENTER.
3
To save the measurement results, use the cursor
keys (
e
/
r
) to select “SAVE” and press ENTER.
The adjusted speaker settings are applied.
• To finish the measurement without saving the result, select “CANCEL”.
4
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Measuring at multiple listening positions
(multi measure) (RX-V775 only)
When “Multi Position” is set to “Yes”, follow the procedure below for
measurement.
• Do not stand between the speakers and the YPAO microphone during the
measurement process. It takes about 10 minutes to measure 8 listening positions.
• Move to the corner of the room or leave the room.
• If any error message (such as E-1) or warning message (such as W-1) appears,
see “Error messages” (p.43) or “Warning messages” (p.44).
1
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
• To cancel the measurement temporarily, press RETURN.
The following screen appears on the TV when the
measurement at the first position finishes.
2
Move the YPAO microphone to the next listening
position and press ENTER.
Repeat step 2 until measurements at all listening positions
(up to 8) have been taken.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
TV VOL TV CH
TV
INPUT
MUTE CODE SET
9 0 10 ENT
MEMORY
5
6 8 7
1 2 3 4
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAY RETURN
ENTER
ON
SCREEN
OPTION
TOP MENU
MUTE PROGRAM VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
NET
PARTY HDMI OUT
TUNER
MAIN ZONE 2
USB
MODE
SCENE
BD
DVD
TV NET RADIO
SOURCE RECEIVER
HDMI
AV
AUDIO
5
6 5
V-AUX
1 2 3 4
1 2
1 2
3 4
SUR. DECODE
TV VO T L V CH
TV
INPUT
MUTE CODE SET
9 0 10 ENT
MEMORY
5
6 8
1 2 3 4
MOVIE
ENHANCER
TUNING PRESET
BAND
DISPLAY
ON
SCREEN
OPTION
TOP MENU
MUTE PROGRAM VOLUME
POP-UP/MENU
PURE DIRECT
STRAIGHT
INFO SLEEP
MUSIC
NET
PARTY HDMI OUT
TUNER
MAIN ZONE 2
USB
MODE
SCENE
BD
DVD
TV NET RADIO
SOURCE RECEIVER
HDMI
AV
AUDIO
5
6 5
V-AUX
1 2 3 4
1 2
1 2
3 4
SUR. DECODE
ENTER
RETURN
1 2 3 4 5 6 7 8 9 10
Automatic speaker setup
Cursor keys