24
En
BASIC OPERATION
1
Turn on external components (TV, DVD
player, etc.) connected to this unit.
2
Rotate the
R
INPUT
selector
(or press the
e
Input selection keys
) to select an input
source.
The name of the selected input source is displayed for
a few seconds.
y
•
You can change the input source name displayed on the front panel
display or on the video monitor as necessary (see page 52).
3
Play the external component that you have
selected as the source input, or select a radio
station on the tuner.
Refer to the instruction manuals provided with the
external component for details on playback. For
selecting radio stations or playback of an iPod or
Bluetooth component using this unit, see the
following.
•
•
Using Bluetooth components (see page 37)
4
Turn the
L
VOLUME
control
to adjust the
volume (or press
s
/–
).
This unit has four SCENE keys that allow you to change
input sources and sound field programs with one key. A
set of input source and sound program suitable for a
certain situation, such as playing back movies or music, is
assigned to each key by default.
y
•
This unit turns on when
M
SCENE
(or
i
SCENE
) is pressed during
standby.
•
If a Yamaha DVD player that can receive SCENE control signals is
connected to the REMOTE OUT jack of this unit, the DVD player
automatically turns on and starts playback when
M
SCENE
(or
i
SCENE
) is pressed (see page 19). For details, refer to the instruction
manual of the DVD player.
Press
M
SCENE
(or
i
SCENE
).
Select the desired input source/sound field
program, and press down
M
SCENE
(or
i
SCENE
) until “SET Complete” appears on the
front panel display.
When the OSD is displayed on the video monitor,
“SCENE Setting Complete” appears on the video monitor.
y
•
If you are using the remote control for an external component, set that
external component too whenever SCENE setting is performed. For more
details, see the next section.
Playback
Basic procedure
Note
When you play back a DTS-CD, noise may be output in some
conditions, which may cause a speaker malfunction. Make sure
that the volume is set to low before starting playback. If noise is
output, do the following.
1) When only noise is output
If a DTS bitstream signal is not properly input to this unit,
only noise is output. Connect the playback component to this
unit by digital connection and play back the DTS-CD. If the
condition is not improved, the problem may results from the
playback component. Consult the manufacturer of the
playback component.
2) When noise is output during playback or skip operation
Before playing back the DTS-CD, display the OPTION
menu after selecting the input source and set “Decoder
Mode” to “DTS” (see page 40).
VOL.
SW
C
L
R
SL
SR
AV1
Input source name
VOL.
SW
C
L
R
SL
SR
Volume-18.5dB
Volume
Using the SCENE function
Input source
Sound field program
BD/DVD
HDMI1
Straight
TV
AV1
Straight
CD
AV3
Straight
RADIO
TUNER
7ch Enhancer
Selecting a SCENE
Registering input source/sound field
program
