manualshive.com logo in svg

Yamaha RX-V750, Руководство пользователя

Yamaha RX-V750 - высококачественный AV-ресивер с множеством функций и возможностей. Скачайте бесплатное руководство по обслуживанию на manualshive.com, чтобы узнать больше о вашем устройстве и его настройках. Наслаждайтесь кристально чистым звуком и удобством использования с Yamaha RX-V750.

Поделиться
Скачать
background image

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

© 2004                                         All rights reserved.

Printed in Malaysia  

  WC85490

RX-V750

AV Receiver

OWNER’S MANUAL

U

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround, 

Surround back

20 Hz to 20 kHz, 0.06% THD, 8 

Ω 

.................................... 100 W

• Maximum Power (EIAJ)

[China, Korea and General models]

1 kHz, 10% THD, 8 

Ω 

....................................................... 140 W

• Dynamic Power (IHF)

8/6/4/2 

Ω

 .......................................................135/170/200/245 W

• DIN Standard Output Power [U.K., Europe and Asia models]

1 kHz, 0.7% THD, 4 

Ω 

...................................................... 150 W

• IEC Output Power [U.K., Asia and Europe models]

1 kHz, 0.06% THD, 8 

Ω 

.................................................... 110 W

• Damping Factor (IHF)

20 Hz to 20 kHz, 8 

Ω 

................................................ 100 or more

• Frequency Response

CD terminal to Front L/R ..................... 10 Hz to 100 kHz, –3 dB

• Total Harmonic Distortion

PHONO to REC OUT (20 Hz to 20 kHz, 1 V)  .................  0.02%
CD, etc. to Front L/R (20 Hz to 20 kHz, 50 W, 8 

Ω) 

........  0.06%

• Signal to Noise Ratio (IHF-A Network)

Phono (5 mV) to REC OUT
[U.K., Europe, Australia and Asia models]  ........................ 81 dB
[Other models]  .................................................................... 86 dB
CD (250 mV) to Front L/R, Effect Off  ............................. 100 dB

• Residual Noise (IHF-A Network)

Front L/R ..............................................................  150 µV or less

• Channel Separation (1 kHz/10 kHz)

PHONO (shorted) to Front L/R  ..............................  60 dB/55 dB
CD (5.1 k

Ω

 terminated) to Front L/R  .....................  60 dB/45 dB

• Tone Control (Front L/R)

BASS Boost/Cut ......................................................  ±6 dB/50 Hz
BASS Turnover Frequency  ............................................... 350 Hz
TREBLE Boost/Cut  ..............................................  ±6 dB/20 kHz
TREBLE Turnover Frequency  ......................................... 3.5 kHz

• Phones Output  ......................................................... 150 mV/100 

Ω

• Input Sensitivity/Input Impedance

PHONO  ................................................................. 2.5 mV/47 k

Ω

CD, etc.  ................................................................ 200 mV/47 k

Ω

MULTI CH INPUT  .............................................. 200 mV/47 k

Ω

• Output Level/Output Impedance

REC OUT ............................................................ 200 mV/1.2 k

Ω

PRE OUT  ....................................................................2 V/1.2 k

Ω

SUB WOOFER  .......................................................... 4 V/1.7 k

Ω

ZONE 2 OUTPUT

[U.S.A., Canada and Australia models]  ........... 200 mV/1.2 k

Ω

VIDEO SECTION

• Video Signal Type ......................................................... PAL/NTSC

• Signal to Noise Ratio ............................................................. 50 dB

• Frequency Response (MONITOR OUT)

Composite, S-Video ................................ 5 Hz to 10 MHz, –3 dB
Component  ............................................. 5 Hz to 60 MHz, –3 dB

FM SECTION

• Tuning Range 

[U.S.A. and Canada models]  .........................  87.5 to 107.9 MHz
[Asia and General model] ........ 87.5/87.50 to 108.0/108.00 MHz
[Other models] ...........................................  87.50 to 108.00 MHz

• Usable Sensitivity (IHF) ...................................... 1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

Mono/Stereo  ............................................................ 76 dB/70 dB

• Harmonic Distortion (1 kHz)

Mono/Stereo ..............................................................  0.2%/0.3%

• Stereo Separation (1 kHz) ...................................................... 42 dB

• Frequency Response  ........................  20 Hz to 15 kHz, +0.5, –2 dB

AM SECTION

• Tuning Range 

[U.S.A. and Canada models]  ............................  530 to 1710 kHz
[Asia and General models]  ...............  530/531 to 1710/1611 kHz
[Other models] ..................................................  531 to 1611 kHz

• Usable Sensitivity  ...........................................................  300 µV/m

GENERAL

• Power Supply

[U.S.A. and Canada models]  ............................ AC 120 V, 60 Hz
[Australia model] .............................................. AC 240 V, 50 Hz
[China model]  ................................................... AC 220 V, 50 Hz
[Korea model] ................................................... AC 220 V, 60 Hz
[U.K. and Europe models] ................................ AC 230 V, 50 Hz
[General model] ..............  AC 110/120/220/230-240 V, 50/60 Hz
[Asia model]  .................................  AC 220/230-240 V, 50/60 Hz

• Power Consumption

[U.S.A. and Canada models]  ...............................  400 W/500 VA
[Other models] ..................................................................  440 W

• Standby Power Consumption  ...............................................  0.1 W

• AC Outlets

[U.K. and Australia models] .............  1 (Total 100 W maximum)
[China, Asia and General models] ......  2 (Total 50 W maximum)
[Other models] ..................................  2 (Total 100 W maximum)

• Dimension (W x H x D)  ................................  435 x 171 x 420 mm
                                                                 (17-1/8” x 6-3/4” x 16-1/2”)

• Weight ............................................................  12.5 kg (27 lbs 9 oz)

SPECIFICATIONS

RXV750_U_cv.fm  Page 1  Monday, January 19, 2004  10:04 AM

Содержание RX-V750





























































































Отзывы:

Нет отзывов

Похожие инструкции для RX-V750

JBL CINEMA SB120 Quick Start Manual preview
CINEMA SB120
Бренд: JBL Страницы: 28
JBL Authentics L8 Owner'S Manual preview
Authentics L8
Бренд: JBL Страницы: 16
JBL Authentics L 16 Owner'S Manual preview
Authentics L 16
Бренд: JBL Страницы: 17
D-Box KAI-1P Installation Manual preview
KAI-1P
Бренд: D-Box Страницы: 12
Toa ES-0422WP Instruction Manual preview
ES-0422WP
Бренд: Toa Страницы: 4
Kabola Boiler-CH User Manual preview
Boiler-CH
Бренд: Kabola Страницы: 27
Pyle PWMA230BT Operating Instructions preview
PWMA230BT
Бренд: Pyle Страницы: 4
Toa 30-SDM Instruction Manual preview
30-SDM
Бренд: Toa Страницы: 2
ULTIMEA Dolby Atmos Poseidon D60 User Manual preview
Dolby Atmos Poseidon D60
Бренд: ULTIMEA Страницы: 28
Craig CR4189BT Owner'S Manual preview
CR4189BT
Бренд: Craig Страницы: 2
Epson Ensemble HD 1080 Brochure preview
Ensemble HD 1080
Бренд: Epson Страницы: 4
Epson Ensemble HD Brochure & Specs preview
Ensemble HD
Бренд: Epson Страницы: 20
Epson PowerLite Home Cinema 1080 Specifications preview
PowerLite Home Cinema 1080
Бренд: Epson Страницы: 2
Epson Ensemble HD 1080 User Manual preview
Ensemble HD 1080
Бренд: Epson Страницы: 1
Epson PowerLite Home Cinema 1080 UB User Manual preview
PowerLite Home Cinema 1080 UB
Бренд: Epson Страницы: 1
Epson Ensemble HD 6100 - Home Cinema System User Manual preview
Ensemble HD 6100 - Home Cinema System
Бренд: Epson Страницы: 80
Epson Ensemble HD 6100 - Home Cinema System Brochure preview
Ensemble HD 6100 - Home Cinema System
Бренд: Epson Страницы: 20
Epson Ensemble HD User Manual preview
Ensemble HD
Бренд: Epson Страницы: 132

Бренды по названию

Популярные бренды

Загрузить еще бренды