En
77
■
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of speaker
sounds. When connecting headphones, you can adjust high-frequency range and low-
frequency range of sounds output from headphones.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0db ~ Bypass (Bypass) ~ +6.0dB *0.5dB steps
Default
Bypass (Bypass)
• If you set the balance extremely off, sounds may not match those from other channels well.
Adjusting with the front panel controls
1
Press TONE CONTROL to select “Treble” or “Bass”.
2
Press PROGRAM to make an adjustment.
■
Adaptive DRC (Adaptive DRC)
Sets whether dynamic range (from maximum to minimum) is adjusted automatically in
conjunction with adjusting the volume level. When it is set to “On”, it is useful for
listening to playback at low volume at night.
Settings
If “On” is selected,” the dynamic range becomes narrow at a low volume, and becomes
wide at a high volume.
■
CINEMA DSP 3D Mode (CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D. If this function is set to “On”, CINEMA DSP 3D
functions according to the selected sound programs (except 2ch Stereo and 7ch
Stereo).
Settings
■
Dialogue Lift (Dialog Lift)
Adjusts the vertical position of center sound such as dialogues when presence
speakers are used. If dialogues are heard from a position lower than the TV screen,
adjust this setting to raise the position.
Setting range
0~5 (higher raises the position)
Default
0
On (On)
Adjusts the dynamic range automatically.
Off (Off) (default)
Does not adjust the dynamic range automatically.
Volume: low
Volume: high
Input level
Input level
On
Off
On
Off
Ou
tput l
e
vel
O
ut
pu
t
lev
e
l
On (On) (default)
Enables CINEMA DSP 3D.
Off (Off)
Disables CINEMA DSP 3D.
Ideal position
Содержание RX-V6671
Страница 128: ... 2011 Yamaha Corporation YD458B0 OMEN1 ...