Yamaha RX-V667, Руководство пользователя

Страница: 94 / 144

SETUP
Setting various functions (Setup menu)
En
94
■
Setting TRIGGER OUT functions
Trigger Output
Sets the TRIGGER OUT jack to function synchronized with power
status of each zone or input switching.
Trigger Mode
Specify the condition for the TRIGGER OUT jack to function.
Target Zone
Specify the zone with which the TRIGGER OUT jack functions
synchronized.
Target Source
Specify the output level of the electronic signal transmitted with
each input switching.
Manual
Manually switch the output level for electronic signal transmission.
This setting can also be used to confirm proper function of the
external component connected via the TRIGGER OUT jack.
■
Prohibiting setting changes
Memory Guard
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Language
Select the language used for display of menus and messages.
J
1
Choices: English (English), (Japanese), (French),
(German), (Spanish),
(Russian)
Power
(Default) The TRIGGER OUT jack functions synchronized
with the power status of the zone specified with
“Target Zone.”
Source The TRIGGER OUT jack functions synchronized
with the input switching in the zone specified with
“Target Zone.”
Electronic signal is transmitted according to the
setting made in “Target Source.”
Manual Select this to manually switch the output level for
electronic signal transmission with “Manual.”
Main
(Default) When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with power status
of the main zone.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with power status
of Zone2.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in Zone2.
All When “Trigger Mode” is set to “Power,” electronic
signal transmission is synchronized with power status
of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic
signal transmission is synchronized with input
switching in the main zone or Zone2.
Low Stops the electronic signal transmission when you
switch to the input source specified in this option.
High (Default) Transmits the electronic signal when you switch to the
input source specified in this option.
This setting is available only when “Trigger Mode” is set to
“Source.”
Low Stops the electronic signal transmission.
High
(Default) Transmits the electronic signal.
This setting is available only when “Trigger Mode” is set to
“Manual.”
Off
(Default) Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to “Off.”
While set to “On,” the unit displays “Memory
Guard!” when an attempt is made to change the
settings.
J
1 :
Content window information is displayed in the language in which that
information was released.