n
Selecting the surround decoder used in the program
Select the surround decoder used when “Sur.Decode” is selected in “Program” in the
“Option” menu or selected by pressing PROGRAM.
Note
For details on “Program” in the “Option” menu, see the following:
▪ “Selecting sound programs” (p.78)
Option menu
“DSP/Surround” > “Sur.Decode”
Settings
DPL Movie
Uses the Dolby Pro Logic II decoder suitable for movies.
DPL Music
Uses the Dolby Pro Logic II decoder suitable for music.
DPL Game
Uses the Dolby Pro Logic II decoder suitable for games.
Neo:6 Cinema
Uses the DTS Neo: 6 decoder suitable for movies.
Neo:6 Music
Uses the DTS Neo: 6 decoder suitable for music.
Note
▪ For details on each decoder, see the following:
– “Glossary of audio decoding format” (p.140)
▪ You can adjust the surround decoder parameters in “DSP Parameter” in the “Setup” menu. For details,
see the following:
– “Setting the broadening effect of the front sound field” (p.101)
– “Adjusting the broadening effect of the center sound field” (p.101)
– “Adjusting the difference in level between the front and surround sound fields” (p.101)
– “Adjusting the center localization (broadening effect) of the front sound field” (p.101)
n
Adjusting the sound field effect level
Adjusts the sound field effect level.
Option menu
“DSP/Surround” > “DSP Level”
Setting range
-6 dB to +3 dB (1 dB increments)
n
Adjusting the dynamic range automatically
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, the dynamic range becomes
narrow at a low volume and wide at a high volume. It is useful for listening to playback
at a low volume at night.
Option menu
“DSP/Surround” > “Adaptive DRC”
Settings
Off
The dynamic range is not automatically adjusted.
On
Automatically adjusts the dynamic range.
En
80
