Configuring the network settings
Checking the network information of the unit
Displays the network information of the unit.
Setup menu
“Network” > “Information”
Status
The connection status of the NETWORK jack
Connection
Connection method
SSID
The access point to which the unit is connected
MusicCast Network
Readiness or not for the MusicCast Network
MAC Address (Ethernet)
MAC address
MAC Address (Wi-Fi)
IP Address
IP address
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
DNS Server (S)
The IP address of the secondary DNS server
Setting the network connection method (Wired/
Wireless)
Selects the network connection method.
Setup menu
“Network” > “Network Connection”
Choices
Wired
Select this option when you want to connect the unit to a network with
a commercially-available network cable.
Wireless(Wi-Fi)
Select this option when you want to connect the unit to a network via
the wireless router (access point).
Note
For details on the network connection, see the following:
▪ “Preparing for connecting to a network” (p.29)
Setting the network parameters automatically
(DHCP)
Set the network parameters (such as IP address, Subnet Mask, and Default Gateway)
automatically using a DHCP server.
Setup menu
“Network” > “IP Address” > “DHCP”
Settings
Off
Does not use a DHCP server. Configure the network parameters manually.
On
Uses a DHCP server to automatically obtain the unit’s network parameters
(such as IP address).
En
109
