Yamaha RX-V3900, Руководство пользователя

Страница: 77 / 854

73
En
Graphical user interface (GUI) menu
AD
V
ANCED
OPERA
T
ION
English
■
Compressed Music Enhancer mode parameter descriptions
■
Decoder parameter descriptions
■
Initialize (Parameter initialization)
Use this feature to initialize the parameter of the selected sound field program.
Choices:
No , Yes
• Select “Yes” and then press
9
ENTER to set the program parameters to the factory default settings.
• Select “No” (or press
9 l
) to cancel the program parameter initialization.
y
Use “DSP PARAM” of “INITIALIZE” in “Advanced setup” to initialize the parameters of all sound field programs (page 111).
The Compressed Music
Enhancer mode
Features
Level
(“Straight Enhancer” and
“7ch Enhancer” only)
Straight enhancer or 7-channel enhancer effect level. Select “High” or “Low” to adjust the effect for the high-
frequency.
Choices: High , Low
Decoder parameter Features
Panorama
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well
as the front speakers for a wraparound effect.
Choices: Off , On
Center Width
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music center width. Moves the center channel output completely
towards the center speaker or towards the front left and right speakers. A larger value moves the center
channel output towards the front left and right speakers.
Control range: 0 (center channel sound is output only from the center speaker) to
7 (center channel sound is output only from the front left and right speakers)
Initial setting: 3
Dimension
(“PLIIx Music” and “PLII
Music” only)
Pro Logic IIx Music and Pro Logic II Music dimension. Adjusts the sound field either towards the front or
towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front)
Initial setting: STD (standard)
Center Image
(“Neo:6 Music” only)
DTS Neo:6 Music center image. Adjusts the front left and right channel output relative to the center channel
to make the center channel more or less dominant as necessary.
Control range: 0.0 (center channel sound is output only from the front left and right speakers) to
1.0 (center channel sound output only from the center speaker)
Initial setting: 0.3