Playback of Bluetooth® device contents
Connect a paired Bluetooth device and start playback. Check the following
beforehand:
• Pairing has been completed.
• Bluetooth function on the Bluetooth device is turned on.
1
Operate the Bluetooth device to establish a Bluetooth connection.
Select the model name of the unit from the Bluetooth device list on your
device.
When a connection is established, the unit’s input source automatically
switches to “Bluetooth”.
Note
▪ If you do not want the input source to switch automatically when a connection is established, set
“Input Interlock” (p.47) to “Off” in the “Option” menu.
▪ You can operate the unit to search and connect the Bluetooth device (only the most recently
connected device). In that case, follow one of the procedures below.
– Switch the input source to “Bluetooth”.
– Press ENTER while the input source is “Bluetooth”. Otherwise, press OPTION and use the
cursor keys to select “Connect”.
▪ If you cannot connect the device, please perform pairing again.
2
Operate the Bluetooth device to play back music.
Note
You cannot operate the unit to select or play back music, or display informations such as song
names.
Disconnecting a Bluetooth® connection
Follow one of the procedures below to disconnect a Bluetooth connection.
• Perform the disconnect operation on the Bluetooth device.
• Press ENTER.
• Press OPTION and use the cursor keys to select “Disconnect”.
• Switch the unit's input source to other than “Bluetooth”.
En
43
