Playing back music stored on a Bluetooth® device
You can play back music files stored on a Bluetooth device on the unit.
Please also refer to the owner’s manual of your Bluetooth device.
Note
▪ The Bluetooth device must support A2DP.
▪ You cannot play back video files stored on a Bluetooth device on the unit.
Connecting a Bluetooth® device (pairing)
When connecting a Bluetooth device to the unit for the first time, the pairing operation
is required to perform. Pairing is an operation that registers the Bluetooth devices with
each other beforehand. Once pairing has been completed, subsequent reconnection
will be easy even after the Bluetooth connection is disconnected.
1
Press BLUETOOTH to select “Bluetooth” as the input source.
2
Hold down MEMORY on the front panel or the remote control for
more than 3 seconds.
“Searching…” appears on the front display.
Note
▪ You can also use the “Option” menu to pair a Bluetooth device. Press OPTION, and then use the
cursor keys to select “Pairing”.
▪ If another Bluetooth device is already connected, disconnect the Bluetooth connection before
you perform a pairing operation.
▪ To cancel pairing, press MEMORY.
3
Turn on the Bluetooth function on your device.
4
From the Bluetooth device list on your device, select “*******
Yamaha” (*******: model name of the unit).
After pairing has been completed and the unit is connected to the
Bluetooth device, “Connected” appears on the front display. While a
Bluetooth connection is established, the Bluetooth indicators light up.
MUTE
ENHANCER
STEREO TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
VOL.
L C R
SL
SW
SR
VOL.
Connected
OUT
Note
▪ If you are prompted to input a passkey during a pairing procedure, input the numerals “0000”.
▪ Complete a pairing procedure within 30 seconds.
▪ If no Bluetooth devices are found, “Not found” appears.
En
42
