96
En
Graphical user interface (GUI) screen
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
1
Set the operation mode selector to
D
AMP
and then press
G
SET MENU
on the remote
control.
2
Press
4
k
/
n
repeatedly to select “Signal
Info.”.
The audio information of the current input source
appears in the GUI screen.
3
Press
4
l
/
h
repeatedly to select “Audio
Info.” or “Video Info.”.
y
The information is also appears in the front panel display.
Press
4
l
/
h
repeatedly to change the displayed
information.
■
Audio Info. (Audio information)
• “–––” appears when this unit cannot display the corresponding
information.
• Some high definition audio bitstream contents may not include
the discrete surround back left and right channel signals but are
encoded at the bitrate of 192 kHz.
• Even if you make settings to output bitstreams directly, some
players convert the Dolby TrueHD or Dolby Digital Plus
bitstreams to the Dolby Digital bitstreams, while converting the
DTS-HD Master Audio or DTS-HD High Resolution Audio
bitstreams to the DTS bitstreams.
■
Video Info. (Video information)
Signal Info.
(Input signal information)
Format
Signal format. When this unit cannot detect a
digital signal, it automatically switches to
analog input.
Sampling
The number of samples per second taken from
a continuous signal to make a discrete signal.
Channel
The number of source channels in the input
signal (front/surround/LFE). For example, a
multi-channel soundtrack with 3 front
channels, 2 surround channels and LFE, is
displayed as “3/2/0.1”.
Bitrate
The number of bits passing a given point per
second.
Dialogue
The dialogue normalization level preset to the
current input bitstream signal (see page 135).
Flag1/Flag2
Flag data encoded in the bitstream, or PCM
signals that cue this unit to automatically
switch decoders (“Surround EX”, etc.).
Notes
HDMI Signal
Type of the source video signals and
the video signals output at the HDMI
OUT jack of this unit.
HDMI Resolution
Resolution of the input signal (analog
or HDMI) and the output signal
(HDMI).
Analog Resolution
Resolution of the source video signals
and the analog video signals output at
the COMPONENT MONITOR OUT
jacks of this unit.
HDMI Error
(HDMI Message)
Error message for HDMI sources or
connected HDMI devices. See
page 129 for details.