Yamaha RX-V377, Руководство по обслуживанию

Страница: 112 / 122

112
RX-V377/HTR-3067
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z
(power).
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press
z
(power) to set the unit to standby mode and turn it on again.
The new settings take effect.
ADVANCED SETUP menu items
• Default settings are underlined.
Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Settings
z
(power)
STRAIGHT PROGRAM
Item Function
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
. D I l o r t n o c e t o m e r s ’t i n u e h t s t c e l e S D I E T O M E R
TU
(Asia, Taiwan and General models only)
Changes the FM/AM tuning frequency setting.
.t u p t u o I M D H f o e p y t l a n g i s o e d i v e h t s e h c ti w S T A M R O F V T
. s g n it t e s t l u a f e d e h t s e r o t s e R T I N I
. e r a w m ri f e h t s e t a d p U E T A D P U
VERSION Checks the version of firmware currently installed on the unit
6
Ω
MIN
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the
unit.
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
SP IMP.••8¬MIN
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (
e
) and SCENE (BD/DVD) together for 3
seconds.
To select ID2, hold down the cursor key (
e
) and SCENE (TV) together for 3
seconds.
Changing the FM/AM tuning frequency setting (TU)
(Asia, Taiwan and General models only)
Change the FM/AM tuning frequency setting of the unit depending on your listening
environment.
Settings
Switching the video signal type (TV FORMAT)
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea, Taiwan and General models: NTSC
Other models: PAL
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz
steps and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
VOL.
MUTE
ENHANCER STEREO TUNED
SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
REMOTE ID••ID1
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
TU••••FM50/AM9
VOL.
MUTE
ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC
VIRTUAL
TV FORMAT•NTSC
Restoring the default settings (INIT)
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
INIT••••CANCEL
Updating the firmware (UPDATE)
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. For details, refer
to the information supplied with updates.
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Save the downloaded firmware to the root folder of a USB memory device.
2
Press PROGRAM on the front panel to select “UPDATE”.
3
Connect the USB memory device to the USB jack.
4
To start firmware update, press INFO on the front panel.
Checking the firmware version (VERSION)
Check the version of firmware currently installed on the unit.
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
UPDATE•••••USB
VOL.
MUTE ENHANCER STEREO TUNED SLEEP
OUT
ECO
CHARGE
ADAPTIVE DRC VIRTUAL
VERSION••xx.xx
■
CONFIGURING THE SYSTEM SETTINGS