64
En
Operating various settings for this unit (Setup menu)
■
Max Volume
Sets the maximum volume level so that the volume will
not be accidentally increased. For example, you can adjust
the volume between –80.0 dB and –5.0 dB (or Mute) when
you set this parameter to “–5.0dB”. The volume increases
to the maximum level when this parameter is set to +16.5
dB (default).
■
Initial Volume
Sets the volume at the time this unit is turned on. When
this parameter is set to “Off”, the volume level used when
this unit was set to standby is applied.
Note
•
When you set “Max Volume” and “Initial Volume” the setting of “Max
Volume” becomes effective. For example, when you set “Max Volume”
to “–30.0dB” and “Init. Volume” to “0.0dB”, the volume is
automatically set to “–30.0dB” at the next time this unit is turned on.
Changes input source names to be displayed on the front
panel display.
Selecting a name to be displayed from templates
Press
j
Cursor
k
/
n
to select the input source name to
edit and then press
j
Cursor
l
/
h
to select a new
name from the templates (Blu-ray, DVD, SetTopBox,
etc.).
Entering an original name
Press
j
Cursor
k
/
n
to select the input source name to
edit and then press
j
ENTER
. Enter up to 9 characters
by selecting one character at a time with the following key
operations.
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
Sets the maximum volume level and initial volume level
of Zone2/3.
y
•
The menu items for Zone2 are available only when “Extra Speaker
Assignment” is set to “Zone2” or “Zone2 + Zone3” (page 60).
•
The menu items for Zone3 are available only when “Extra Speaker
Assignment” is set to “Zone2 + Zone3” (page 60).
■
Zone2/3 Max Volume
Sets the maximum volume level of Zone2/3, so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
when you set this parameter to “–5.0dB”.
■
Zone2/3 Initial Volume
Use this feature to set the volume level of Zone2/3 when
the power of Zone2/3 unit is turned on. When this
parameter is set to “Off”, the volume level used at the time
when the Zone2/3 unit was set to standby is applied.
Note
•
The “Zone2 Max Volume” or “Zone3 Max Volume” setting takes priority
over the “Zone2 Initial Volume” or “Zone3 Initial Volume” setting. For
example, if you set “Zone2 Max Volume” to “–30.0dB” and “Zone2
Initial Volume” to “0.0dB”, the volume is automatically set to “–30.0dB”
at the next time the Zone2 unit is turned on.
You can set items for network features.
■
IP Address
Sets the network parameters (IP address, etc).
DHCP
Select whether or not this unit obtain the network
parameters (IP address, subnet mask, default gateway,
primary DNS server and secondary DNS server) from the
DHCP server of the connected network.
IP Address
Use this parameter to specify the IP address assigned to
this unit. This value must not be the same as the one used
for other devices in the target network.
Subnet Mask
Use this parameter to specify the subnet mask value
assigned to this unit.
Default Gateway
Use this parameter to specify the IP address of the default
gateway.
DNS Server (P) / DNS Server (S)
Use this parameter to specify the IP address of the primary
and secondary DNS (Domain Name System) servers.
y
•
If you have only one DNS address, enter the DNS address in “DNS
Server (P)”. If you have two or more DNS addresses, enter one of them in
“DNS Server (P)” and another in “DNS Server (S)”.
■
MAC Address Filter
Sets MAC address filter to restrict access to this unit via
LAN.
MAC Address Filter
Select whether or not to use the MAC address filter
function.
Adjustable range:
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Adjustable range:
Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
Input Rename
j
Cursor
l
/
h
Selects a character to edit.
j
Cursor
k
/
n
Selects a character to enter.
j
ENTER
Enters a selected character.
Zone
Adjustable range:
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
Adjustable range:
Off*, Mute, –80.0dB to +16.5dB (0.5 dB step)
Network
Choices:
On*, Off
On
Select this setting when this unit can obtain
the network parameters from the DHCP
server of the connected network.
Off
Select this setting when you set the network
parameters manually.
Choices:
Off*, On
Off
Disables the MAC address filter function.
