44
En
Setting the option menu for each input source (Option menu)
Signal Info
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using
j
Cursor
k
/
n
.
•
Audio information
•
Notes
•
“No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
•
The bit rate may vary during playback.
•
Video information
•
•
HDMI error message
(appears only when an error has occurred)
•
FM Mode
Sets FM broadcasting receiving mode.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (page 31).
Clear Preset
Clears preset station (page 32).
PTY Seek
Searches a station that is broadcasting a program under the
desired category from the preset stations while using the
Radio Data System (page 33).
EON
Enables you to receive the EON (enhanced other network)
data service of the Radio Data System (page 34).
Shuffle
Changes the shuffle playback style.
y
•
This setting is shared among the USB/NET sub-input sources (USB and
PC).
Repeat
Changes the repeat playback style.
y
•
This setting is shared among the USB/NET sub-input sources (USB and
PC).
Refresh
Updates the PC server list displayed in the GUI screen
(page 39).
Connect / Disconnect
Connects to or disconnects from a Bluetooth component
(page 37).
PLIIx
Music
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
EX/ES
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off
Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
Input source:
HDMI1-4, AV1-4, V-AUX, USB (USB/NET), NET
RADIO (USB/NET), PC (USB/NET)
Format
Format of digital audio signals.
Channel
The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
“3/2/0.1” is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as “5.1ch” may be displayed.
Sampling
Frequency
The sampling frequency per second in
analog-to-digital conversion.
Bitrate
The bit rate of input signal per second.
Video In
Format and resolution of video input
signal.
Video Out
Format and resolution of video output
signal.
Message
Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
Out of Res.
The connected monitor is not compatible
with the video input signal.
Input source:
TUNER
Choices:
Stereo*, Mono
Stereo
Receives in stereo mode by priority.
Mono
Receives in monaural mode. You can get a
better reception in monaural mode.
Input source:
TUNER
Input source:
TUNER
Input source:
TUNER
Input source:
TUNER
Input source:
iPod (DOCK), USB (USB/NET), PC (USB/NET)
Choices:
iPod (DOCK): Off*, Songs, Albums
USB (USB/NET), PC (USB/NET): Off*, On
Input source:
iPod (DOCK), USB (USB/NET), PC (USB/NET)
Choices:
Off*, One, All
Input source:
PC (USB/NET)
Input source:
BLUETOOTH (DOCK)